The Simpson DGT2.56/9.5 DGT Top-Flange Fire Wall Hanger by Simpson Strong-Tie is engineered for multifamily, multilevel Type III residential construction requiring a code-compliant, fire-rated joist connection. Designed for 2-1/2 in. x 9-1/2 in. engineered wood members, this patent-pending hanger is load tested, fire rated, and built to accommodate two layers of 5/8 in. gypsum board after framing is complete. It is the first fire wall hanger designed to install with a power nailer, delivering meaningful time savings on the jobsite and helping keep construction projects on schedule. Tested to ASTM E814 and fire rated for use on both sides of the wall, the DGT2.56/9.5 is made in the United States from 12-gauge G90 galvanized steel and backed by Simpson Strong-Tie expert service and technical support.

Key Features

• Loads tested and code listed for 1-1/2 in. and 2-1/2 in. power-driven or hand-installed nails
• Two-hour fire rating applies to 2x4 or thicker walls
• Innovative top-flange design for back-to-back installation on 2x6 (min.) walls
• Space for two layers of 5/8 in. drywall after framing - drywall slips into place once framing is complete
• Two-hour Fire-Resistant rating Intertek Design No. SST/WPCF 120-01
• Tested according to ASTM E814 and fire rated for use on both sides of the wall
• First fire wall hanger designed for power nailer installation, saving time before hanging drywall
• Made from 12-gauge steel with Zinc Galvanized (G90) finish for corrosion resistance
• Made in the United States and backed by expert service and technical support

Specifications

• MPN: DGT2.56/9.5
• Brand: Simpson Strong-Tie
• Member Size: 2-1/2 in. x 9-1/2 in.
• Seat Width (W): 2-9/16 in.
• Height (H): 9-7/16 in.
• Gauge: 12
• Coating / Finish: Zinc Galvanized, G90
• Fire Rating: Two-hour fire-resistant rating (Intertek Design No. SST/WPCF 120-01)
• Test Standard: ASTM E814
• Country of Origin: United States
• Installation Fasteners: Install with (6) 0.148 in. x 1-1/2 in. OR 0.148 in. x 2-1/2 in. nails in the top; (2) 0.148 in. x 1-1/2 in. nails OR (4) 0.148 in. x 2-1/2 in. nails in the face; and (6) 0.148 in. x 1-1/2 in. nails in the joist (sold separately)

Approved Applications

• Multifamily and multilevel Type III residential construction
• Fire wall joist connections on 2x4 or thicker walls with two-hour fire rating requirement
• Back-to-back installation on 2x6 (minimum) walls using the top-flange design
• Applications requiring two layers of 5/8 in. gypsum board on both sides of the wall
• Jobsites where power nailer installation is preferred for schedule efficiency

Options

• Contact us for Configurable Options and Special orders

Frequently Asked Questions

What fire rating does the DGT2.56/9.5 carry, and how was it tested?

The DGT2.56/9.5 carries a two-hour fire-resistant rating under Intertek Design No. SST/WPCF 120-01. It has been tested in accordance with ASTM E814 and is fire rated for use on both sides of the wall. The two-hour fire rating applies to 2x4 or thicker walls.

Can this hanger be installed with a power nailer?

Yes. The DGT Top-Flange Fire Wall Hanger is the first fire wall hanger specifically designed for power nailer installation. It is loads tested and code listed for both 1-1/2 in. and 2-1/2 in. power-driven nails, as well as hand-installed nails, providing flexibility on the jobsite.

How does the top-flange design accommodate drywall installation?

The innovative top-flange design provides space for two layers of 5/8 in. gypsum board (drywall) to be slipped into place after framing is complete. This means drywall does not need to be installed before the hanger, simplifying sequencing on the jobsite. The design also supports back-to-back installation on 2x6 (minimum) walls.

What fasteners are required to install the DGT2.56/9.5?

Install with (6) 0.148 in. x 1-1/2 in. OR 0.148 in. x 2-1/2 in. nails in the top; (2) 0.148 in. x 1-1/2 in. nails OR (4) 0.148 in. x 2-1/2 in. nails in the face; and (6) 0.148 in. x 1-1/2 in. nails in the joist. Always follow the published load tables and installation instructions to ensure code compliance.

Downloads and Resources

• Two-hour Fire-Resistant rating Intertek Design No. SST/WPCF 120-01
• Specifications

Note: Product dimensions may differ from picture.