Product Description
The Simpson DGHT Top-Flange Fire Wall Hanger is a patent-pending, load-tested hanger engineered for multifamily and multilevel Type III residential construction where two-hour fire-rated wall assemblies are required. Designed to accept a 2 in. to 2-1/16 in. x 11-7/8 in. engineered wood member, this joist hanger is the first fire wall hanger built to install with a power nailer - cutting jobsite time before drywall goes up and helping keep framing schedules on track. Tested to ASTM E814 and certified under Intertek Design No. SST/WPCF 120-01, it delivers a two-hour fire-resistant rating on both sides of the wall without sacrificing code compliance or structural performance.
Key Features
- Power nailer compatible, loads tested and code listed for 1-1/2 in. and 2-1/2 in. power-driven or hand-installed nails - lets crews install fire wall hangers with the same tools used throughout the framing process, reducing labor time and keeping projects on schedule.
- Two-hour fire rating applies to 2x4 or thicker walls - meets stringent fire assembly requirements for multifamily and multilevel Type III construction without requiring special wall thicknesses beyond standard framing.
- Innovative top-flange design for back-to-back installation on 2x6 (min.) walls - allows hangers to be mounted on opposite sides of a shared fire wall, maximizing layout flexibility in multifamily framing.
- Space for two layers of 5/8-in. drywall after framing is complete - drywall can be slipped into place after the structure is up, so hanging is not interrupted and sequencing remains straightforward.
- Certified under Intertek Design No. SST/WPCF 120-01, tested to ASTM E814 - provides inspectors and project managers with a recognized, third-party validated fire rating on both sides of the assembly.
- Made from 10-gauge steel with a G90 zinc galvanized finish - heavy-gauge construction delivers the load capacity required for fire wall assemblies, while the galvanized coating provides corrosion resistance in demanding construction environments.
Why This Product
- The only fire wall hanger designed for power nailer installation - this patent-pending design eliminates the need to hand-nail every connector in a fire wall assembly, saving meaningful time on projects where dozens of hangers are required before drywall can begin.
- Two-hour fire-resistant rating on both sides of the wall - tested to ASTM E814 and certified under a recognized Intertek design number, this hanger satisfies the fire assembly requirements that multifamily and multilevel Type III residential projects demand, with documentation inspectors expect.
- Top-flange configuration keeps the construction sequence intact - because two layers of 5/8-in. gypsum board slip into place after framing, crews are not forced to coordinate hanger installation around drywall, reducing rework and scheduling conflicts on the jobsite.
- Built for the specific demands of fire wall framing in multifamily construction - the back-to-back installation capability on 2x6 minimum walls, combined with a heavy 10-gauge steel build and G90 galvanized coating, makes this hanger a purpose-built solution rather than a general-purpose connector pressed into fire wall service.
Specifications
- MPN: DGHT2.1/11.88
- Member Size: 2 to 2-1/16 in. x 11-7/8 in.
- Seat Width: 2-1/8 in.
- Height: 11-13/16 in.
- Gauge: 10
- Coating/Finish: Zinc Galvanized, G90
- Fire Rating: Two-hour
- Fire Rating Standard: ASTM E814
- Intertek Design No.: SST/WPCF 120-01
- Installation Fasteners: (6) 0.148 in. x 1-1/2 in. OR 0.148 in. x 2-1/2 in. nails in the top; (2) 0.148 in. x 1-1/2 in. nails OR (4) 0.148 in. x 2-1/2 in. nails in the face; and (6) 0.148 in. x 1-1/2 in. nails in the joist (sold separately)
- Country of Origin: United States
Approved Applications
- Multifamily residential construction
- Multilevel Type III residential construction
- Fire wall assemblies rated for use on both sides of the wall
- Back-to-back installation on 2x6 minimum walls
- Framing assemblies requiring two layers of 5/8-in. gypsum board (drywall)
Options
- Contact us for Configurable Options and Special orders
Downloads and Resources
- Two-hour Fire-Resistant rating Intertek Design No. SST/WPCF 120-01
- Specifications
Note: Product dimensions may differ from picture.
Frequently Asked Questions
What fire rating does the DGHT2.1/11.88 carry, and how was it tested?
The Simpson Strong-Tie DGHT Top-Flange Fire Wall Hanger carries a two-hour fire-resistant rating. It has been tested according to ASTM E814 and is certified under Intertek Design No. SST/WPCF 120-01. The rating applies to both sides of the wall and to walls constructed with 2x4 or thicker framing members.
Can this hanger be installed with a power nailer?
Yes. The DGHT is specifically designed to be installed with a power nailer, making it the first fire wall hanger to offer this capability. It is loads tested and code listed for both 1-1/2 in. and 2-1/2 in. power-driven nails, as well as hand-installed nails, providing flexibility on the jobsite.
How does the top-flange design accommodate drywall installation?
The top-flange design of the DGHT allows drywall to be installed after framing is complete. The hanger provides space for two layers of 5/8-in. gypsum board (drywall) to be slipped into place once framing is finished, streamlining the construction sequence and helping keep projects on schedule.
What is the minimum wall thickness required for back-to-back installation?
The innovative top-flange design supports back-to-back installation on walls that are 2x6 or thicker (minimum). The two-hour fire rating applies to walls built with 2x4 or thicker framing, making the DGHT versatile for a range of wall assembly configurations in Type III residential construction.
Reviews
FAQs
Standard Shipping is free on most orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.