The Simpson DGHT2.37/9.5 DGHT Top-Flange Fire Wall Hanger by Simpson Strong-Tie is a patent-pending, load-tested joist hanger engineered for multifamily, multilevel Type III residential construction. Designed to carry 2-5/16 in. x 9-1/2 in. engineered wood members, this innovative hanger delivers a two-hour fire rating and is the first fire wall hanger built to install with a power nailer - helping crews save time and keep construction schedules on track. Its top-flange design accommodates two layers of 5/8 in. gypsum board slipped into place after framing is complete, tested to ASTM E814 and rated for use on both sides of the wall.

Key Features

• Loads tested and code listed for 1-1/2 in. and 2-1/2 in. power-driven or hand-installed nails
• Two-hour fire rating applies to 2x4 or thicker walls
• Innovative top-flange design for back-to-back installation on 2x6 (min.) walls
• Space for two layers of 5/8-in. drywall after framing
• Two-hour Fire-Resistant rating Intertek Design No. SST/WPCF 120-01
• First fire wall hanger designed for installation with a power nailer
• Tested according to ASTM E814 and fire rated for use on both sides of the wall
• Made from 10-gauge steel for heavy-duty performance
• Galvanized (G90) finish for corrosion resistance
• Made in the United States

Specifications

• MPN: DGHT2.37/9.5
• Brand: Simpson Strong-Tie
• Member (Joist) Size: 2-5/16 in. x 9-1/2 in.
• Seat Width: 2-3/8 in.
• Height: 9-7/16 in.
• Gauge: 10
• Coating / Finish: Zinc Galvanized, G90
• Fire Rating: Two-hour fire rating (Intertek Design No. SST/WPCF 120-01)
• Test Standard: ASTM E814
• Installation Fasteners: Install with (6) 0.148 in. x 1-1/2 in. OR 0.148 in. x 2-1/2 in. nails in the top; (2) 0.148 in. x 1-1/2 in. nails OR (4) 0.148 in. x 2-1/2 in. nails in the face; and (6) 0.148 in. x 1-1/2 in. nails in the joist (sold separately)
• Country of Origin: United States

Approved Applications

• Multifamily residential construction
• Multilevel Type III residential construction
• Fire wall assemblies requiring a two-hour fire rating
• Back-to-back hanger installation on 2x6 (minimum) walls
• Framing applications where drywall is applied after structural framing is complete
• Both sides of fire-rated wall assemblies per ASTM E814 testing

Options

• Contact us for Configurable Options and Special orders

Frequently Asked Questions

What fire rating does the Simpson DGHT2.37/9.5 carry?

The DGHT2.37/9.5 carries a two-hour fire-resistant rating. It has been tested according to ASTM E814 and is fire rated for use on both sides of the wall. The rating is certified under Intertek Design No. SST/WPCF 120-01 and applies to 2x4 or thicker wall assemblies.

Can the DGHT2.37/9.5 be installed with a power nailer?

Yes. The DGHT is the first fire wall hanger specifically designed for installation with a power nailer. It is loads tested and code listed for both 1-1/2 in. and 2-1/2 in. power-driven nails, as well as hand-installed nails, giving installers flexibility on the job site.

How does the top-flange design accommodate drywall installation?

The top-flange design allows the hanger to be installed during framing without blocking the wall cavity. It provides dedicated space for two layers of 5/8 in. gypsum board (drywall) to be slipped into position after the framing is complete, supporting a clean, code-compliant fire wall assembly.

What material and coating is used on this hanger?

The DGHT2.37/9.5 is fabricated from 10-gauge steel and finished with a Zinc Galvanized G90 coating, providing strong corrosion resistance suitable for the demands of residential construction environments.

Downloads and Resources

• Two-hour Fire-Resistant rating Intertek Design No. SST/WPCF 120-01
• Specifications

Note: Product dimensions may differ from picture.