Product Description
The Simpson BA5.12/14 Top-Flange Joist Hanger is a one-piece steel connector engineered for double 2-1/2 in. x 14 in. engineered wood and solid sawn lumber framing applications. Designed to carry medium loads with solid sawn lumber and higher loads with engineered wood products, this hanger supports a range of structural demands through two nailing configurations: minimum nailing with positive-angle nailing (PAN) for moderate load conditions, and maximum nailing for higher load requirements. Stamped from 12-gauge steel with a G90 zinc galvanized finish, the BA5.12/14 delivers reliable corrosion resistance and structural performance in top-flange joist installations.
Key Features
- Cost-effective one-piece design - eliminates the added expense and complexity of welded hangers, reducing both material cost and installation time on the job site
- Full-height joist flange - captures the top chord of the joist to prevent rotation and eliminate the need for web stiffeners, simplifying the overall framing assembly
- Dual nailing options (PAN minimum and maximum nailing) - allows the installer to match the nailing pattern to the actual load condition, making this hanger adaptable across moderate and higher-demand structural applications
- Compatible with both engineered wood products and solid sawn lumber - provides flexibility to use a single hanger model across different framing material choices without compromising load performance
- 12-gauge steel construction - delivers the structural strength and rigidity required for load-bearing joist connections in demanding framing assemblies
- G90 zinc galvanized finish - provides an added layer of corrosion resistance suited for framing environments where moisture exposure is a concern
- Available in sloped and skewed configurations via special order - accommodates non-standard framing angles so contractors are not limited to level, square installations
Why This Product
- One hanger, two load scenarios - the BA5.12/14 supports both moderate loads through minimum PAN nailing and higher loads through maximum nailing, giving structural framers genuine versatility without needing a different product for each condition
- Engineered wood performance in a standard hanger form - while many hangers are optimized only for solid sawn lumber, the BA series is specifically designed to achieve higher load capacities when paired with engineered wood products, making it a practical choice for modern lumber-efficient framing systems
- Rotation prevention built in - the full-height joist flange actively captures the joist top chord and eliminates beam rotation without requiring additional hardware or web stiffeners, reducing both labor and material on each connection point
- Durable single-piece construction from a trusted structural connector brand - Simpson's one-piece stamped design avoids the weak points inherent in welded assemblies, and the G90 galvanized coating helps maintain connection integrity over the long term in varied site conditions
Specifications
- Model Number: BA5.12/14
- Member / Joist Size: Double 2-1/2 in. x 14 in.
- Steel Gauge: 12-gauge
- W (in.): 5-1/8
- H (in.): 14
- B (in.): 3
- TF (in.): 2-1/2
- Coating / Finish: Zinc Galvanized, G90
- Hanger Type: Top-Flange Joist Hanger
- Country of Origin: United States
Approved Applications
- Engineered wood product (EWP) framing - carries higher loads when used with engineered lumber
- Solid sawn lumber framing - supports medium load conditions
- Top-flange installations where beam rotation prevention is critical
- Applications requiring elimination of web stiffeners
- Sloped and/or skewed framing configurations (available via special order modification)
Installation
- Install with 0.162 in. x 3-1/2 in. nails in the header
- Install with 0.148 in. x 1-1/2 in. nails in the joist
Options
- Other widths are available; specify W dimension (the minimum W dimension is 1 9/16").
- For modified hangers, fastener quantity listed in tables may need to increase depending on joist size, skew and slope. All modified hangers are 12 ga.
- Hangers may be modified for slopes and/or skews up to 45
Options
- Contact us for Customizations and Special orders
Frequently Asked Questions
What joist size is the BA5.12/14 designed to fit?
The BA5.12/14 is designed specifically for a double 2-1/2 in. x 14 in. actual joist size, making it suitable for use with double engineered wood or solid sawn lumber members of that dimension.
Can this hanger be used with both engineered wood and solid sawn lumber?
Yes. The BA5.12/14 is compatible with both engineered wood and solid sawn lumber applications. It can carry medium loads with solid sawn lumber and higher loads when used with engineered wood products.
What nails are required to install the BA5.12/14?
Installation requires 0.162 in. x 3-1/2 in. nails in the header and 0.148 in. x 1-1/2 in. nails in the joist. The hanger supports both minimum nailing with positive-angle nailing (PAN) for moderate load conditions and maximum nailing for higher structural loads.
What material and finish is the BA5.12/14 made from, and is it suitable for corrosive environments?
The BA5.12/14 is stamped from 12-gauge steel and features a G90 zinc galvanized finish, which provides extra corrosion resistance, making it a durable choice for applications where moisture exposure is a concern.
Reviews
FAQs
Standard Shipping is free on most orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.