The Simpson SUL26 Joist Hanger Skewed Left for 2x6 from Simpson is a 45 deg.-skewed, U-shaped hanger engineered to support solid sawn and engineered wood products in angled wood framing applications. Designed specifically for left-skewed framing connections, this hanger encapsulates the top flange of the joist so no web stiffeners are required for standard installation - simplifying the job and delivering a strong, reliable connection where a joist meets a header or beam at an angle. Built from 16-gauge steel with a G90 zinc galvanized finish, it is suited for use in structural framing where a precise left-hand skew is required.

Key Features

• 45 deg. left-skewed design - purpose-built for left-angled framing connections, eliminating the need to cut, bend, or improvise a standard hanger to fit an angled layout
• Obround nail holes on the acute side - allow nails to be driven parallel to the joist, making fastening in tight, angled spaces far more practical and achievable
• Accommodates a 40 deg. to 50 deg. skewed joist - provides a 10 deg. range of flexibility around the standard 45 deg. angle so minor framing variations in the field are handled without special hardware
• U-shaped hanger encapsulates the top flange of the joist - no web stiffeners are required for standard installation, reducing material and labor on the job site
• Available in a closed-flange configuration for end-of-wall installation - the acute flange can be turned in on solid sawn sizes, making it adaptable to installations where standard open-flange placement is not possible
• 16-gauge steel construction - provides the structural integrity required for load-bearing joist and rafter connections in wood framing
• G90 zinc galvanized finish - offers corrosion resistance to help the hanger hold up in environments where moisture exposure is a concern

Why This Product

• Engineered specifically for left-hand angled framing - unlike field-bent or generic hangers, the SUL26 is factory-skewed 45 deg. to the left, so the geometry is precise and consistent right out of the package, saving layout time and reducing installation error
• No web stiffeners needed for standard installation - the U-shaped design wraps the top flange of the joist, removing an extra installation step and the added material cost that stiffeners require
• Flexible skew tolerance handles real-world framing variations - the hanger accepts joists skewed anywhere from 40 deg. to 50 deg., meaning small framing discrepancies on the job site do not automatically require a replacement part or a costly correction
• Obround nail holes simplify fastening at difficult angles - on the acute side where access is naturally restricted, the elongated hole shape lets installers drive nails parallel to the joist rather than fighting the angle, reducing installation time and improving fastener placement

Specifications

• MPN: SUL26
• Skew: Left
• Gauge: 16
• Seat Width (W): 1-9/16 in.
• Height (H): 5 in.
• Width (B): 2 in.
• Member Size: 2x6 or 2x8
• Acute Flange Length: 1-5/16 in.
• Obtuse Flange Length: 1-1/8 in.
• Coating/Finish: Zinc Galvanized, G90
• Country of Origin: United States
• Installation Fasteners: Install with (6) 0.162 x 3-1/2-in. nails in the face and (6) 0.148 x 1-1/2-in. nails in the joist, OR (12) #9 x 1-1/2-in. Strong-Drive SD Connector screws (SD9112) (sold separately)

Options

• Contact us for Configurable Options and Special orders

Frequently Asked Questions

What does "SUL" mean, and how is it different from the SUR?

SUL stands for skewed left - meaning the hanger is angled 45 deg. to the left. The SUR and SUL hangers are identical except that they are skewed 45 deg. to the right (SUR) and the left (SUL), respectively. Choosing the correct version depends on the direction your joist angles away from the header or beam.

Can the SUL26 hanger be field-modified to adjust the skew angle?

No. These hangers cannot be modified. However, the SUL26 will accommodate a joist skewed anywhere from 40 deg. to 50 deg., providing a small range of flexibility around the standard 45 deg. angle.

What fasteners are required to install the SUL26?

Install with (6) 0.162 x 3-1/2-in. nails in the face and (6) 0.148 x 1-1/2-in. nails in the joist, OR (12) #9 x 1-1/2-in. Strong-Drive SD Connector screws (SD9112).

Why does the SUL26 feature obround nail holes on the acute side?

The obround nail holes on the acute side of the hanger are specifically designed to allow nails to be easily installed parallel to the joist. This makes fastening more practical in tight or angled framing situations where standard round holes would make nail placement difficult.

Note: Product dimensions and/or Screw or Nail holes may differ from picture. See item description for specifications.