The Simpson 4x10 Joist Hanger Skewed Right is a 14-gauge steel skewed hanger engineered to deliver a precise 45 deg. right-hand connection between a joist and header in angled wood framing applications. Designed by Simpson Strong-Tie as part of the HSUL/HSUR hanger series, it supports 4x10 joists, rafters, or beams where a skewed layout is required, providing reliable load-bearing support underneath the member. The G90 galvanized coating offers extra corrosion resistance, making it well-suited for both interior framing and exposed or moisture-prone environments.

Key Features

• Skewed-right orientation - designed specifically for right-hand 45 deg. framing angles, so builders working with angled joist layouts get a hanger that fits the application without field modification
• Accommodates joists skewed 40 to 50 deg. - provides a practical range of angle tolerance, reducing the need for exact cuts and giving installers flexibility on the job site
• Angled nail slots direct nails for proper installation - guides fasteners into the correct position automatically, helping ensure a secure, code-conscious connection with less room for error
• Square cut or bevel cut joist end accepted - eliminates the requirement for a precise bevel cut, saving time during layout and cutting without compromising connection integrity
• 14-gauge steel construction - provides a heavy-duty, rigid hanger body capable of handling the load demands typical of 4x10 joist and rafter framing
• G90 zinc galvanized finish - delivers an added layer of corrosion resistance compared to standard coatings, extending the service life of the hanger in demanding conditions
• Install with 16d common nails - works with a widely available, standard fastener so no specialty hardware is needed to complete the installation

Why This Product

• Purpose-built for skewed framing - rather than a field-modified or adjustable hanger, this right-skew hanger is factory-formed to the correct angle, giving contractors a cleaner, more consistent connection at 45 deg. right-hand joist intersections
• Flexible installation without sacrificing strength - the combination of a 40-to-50 deg. angle range and acceptance of both square and bevel cut joist ends means fewer cutting adjustments on site while still meeting the structural demands of 4x10 framing
• Corrosion resistance built into the material - the G90 galvanized coating is applied at the steel level, not just a surface treatment, helping the hanger hold up in conditions where moisture exposure is a concern over the life of the structure
• Designed by Simpson Strong-Tie for consistent performance - part of a comprehensive hanger system that includes left-skew, concealed flange, and end-of-wall variants, so the same trusted engineering approach carries across the full range of skewed joist hanger applications

Specifications

• MPN: HSUR410
• Member Size: 4x10
• Acute Flange Length: 2-3/16 in.
• Obtuse Flange Length: 1 in.
• Gauge: 14
• Width (W): 3 9/16 in.
• Height (H): 8 1/2 in.
• Base (B): 2 7/16 in.
• Coating/Finish: Zinc Galvanized, G90
• Skew Direction: Right (45 deg.)
• Fastener Requirement: 16d common nails

Options

Available with the A2 (acute) flange turned in to accommodate end-of-wall installation for solid sawn sizes only. See HSURC or HSULC for the concealed flange version.

Contact us for Configurable Options and Special orders.

Frequently Asked Questions

What is the difference between HSUR and HSUL hangers?

The HSUR and HSUL hangers are identical in design except for their skew direction. The HSUR is skewed 45 degrees to the right, while the HSUL is skewed 45 degrees to the left. Both provide a strong connection between a joist and header.

What range of skew angles can the HSUR410 accommodate?

The HSUR410 can accommodate joists skewed between 40 and 50 degrees, making it suitable for framing applications that require a near-45 deg. angled connection.

Does the joist need to be cut at a specific angle to fit the HSUR410?

No. The joist end may be either square cut or bevel cut, offering flexibility during installation without compromising the integrity of the connection.

What fasteners are required to install the HSUR410?

The HSUR410 should be installed with 16d common nails. The hanger features angled nail slots that direct nails for proper installation, helping ensure a secure and code-compliant connection.

Related Products

• - Heavy Skewed U-Shaped Hanger with Concealed Flanges

Note: Product dimensions and/or nail holes may differ from picture.