Simpson HGUS Galvanized Face-Mount Joist Hanger for 5-1/4 in. x 9-1/2 in. Engineered Wood is an extra-heavy-capacity face-mount girder hanger built for structural applications demanding serious load support. Double-shear nailing distributes the load through two points on each joist nail, delivering greater strength where it counts most. Value-engineered by Simpson to carry high loads at an economical price, this hanger is a reliable choice for contractors and builders working with engineered lumber, glulam beams, and structural composite lumber.

Key Features

• Can be installed after the beam is secured in place - gives installers flexibility on the job site, reducing the need to pre-position hardware before setting the beam
• Double-shear nailing design - distributes load through two points on each joist nail, providing greater connection strength for heavy girder applications
• HGUS-series hangers are tested, load rated and code compliant - gives you confidence the hardware meets structural requirements and will hold up to inspection
• Made from 12-gauge steel - heavy-gauge construction handles the demands of extra-heavy-capacity girder support without compromising structural integrity
• Galvanized G90 zinc coating - provides extra corrosion resistance, helping the hanger perform reliably in tough or moisture-prone construction environments
• Compatible with multiple engineered wood profiles - fits nominal 6x10 lumber, 5-1/4 in. SCL, and 5-1/2 in. glulam beams, making it versatile across common framing materials
• Do not bend or remove tabs - tabs are structural elements of the hanger design, and keeping them intact ensures the connection performs as load rated

Why This Product

• Extra-heavy load capacity at a practical price point - the HGUS series is value-engineered specifically to carry high loads economically, so you get serious structural performance without overspending on hardware
• Engineered for girder support in demanding applications - double-shear nailing and 12-gauge steel construction make this hanger purpose-built for the type of heavy framing loads where standard hangers fall short
• Broad compatibility with modern engineered lumber - designed to work with SCL, glulam, and nominal 6x10 members, this hanger fits the engineered wood products commonly used in today's commercial and residential framing
• Tested, rated, and code compliant out of the box - HGUS-series hangers carry load ratings backed by testing, giving builders and inspectors documented assurance of structural compliance

Specifications

• MPN: HGUS5.50/10
• Gauge: 12
• Seat Width: 5-1/2 in.
• Height: 8-15/16 in.
• Member Size: 5-1/4 in. x 9-1/4 in. to 9-1/2 in., 6x10, 5-1/4 in. SCL, 5-1/2 in. glulam
• Coating/Finish: Zinc Galvanized, G90
• Install With: 16d common nails
• Country of Origin: United States

Options

• Contact us for Configurable Options and Special orders

Frequently Asked Questions

What engineered wood sizes is the HGUS5.50/10 compatible with?

The HGUS5.50/10 is designed for joist sizes of 5-1/4 in. x 9-1/4 in. to 9-1/2 in., which includes nominal 6x10 lumber, 5-1/4 in. SCL (structural composite lumber), and 5-1/2 in. glulam beams.

What type of nails should be used to install this hanger?

This hanger should be installed with 16d common nails for proper load performance and code compliance.

Can this hanger be installed after the beam is already in place?

Yes. The HGUS5.50/10 is designed so that it can be installed after the beam is secured in place, offering installation flexibility on the job site.

What corrosion protection does the HGUS5.50/10 have?

The hanger is coated with a G90 zinc galvanized finish, which provides extra corrosion resistance suitable for demanding construction environments.

Note: Product dimensions and/or nail holes may differ from picture. Please see item description for specifications.