The Simpson CCQM4.62-SDS Column Cap is an embedded steel column cap engineered for raised pier foundation systems where heavy beams bear on concrete or concrete masonry unit (CMU) columns. Designed for non-corner, floor support beam locations, this connector works in conjunction with Simpson Strong-Tie SSTB anchor bolts to deliver the high uplift and lateral resistance required in high-wind regions. Its gray paint finish and heavy-gauge steel construction make it a dependable structural solution for pier-to-beam connections that demand both performance and code-conscious engineering.

Key Features

• Engineered for raised pier foundation systems - purpose-built for the specific load demands of concrete and CMU pier columns, giving builders a reliable connection point where beam-to-pier integrity is critical.
• Works with Simpson Strong-Tie SSTB anchor bolts - the connector is designed as part of a coordinated anchoring system, ensuring the uplift and lateral resistance values are achieved as engineered rather than relying on mismatched hardware.
• Requires 1/4 in. x 2-1/2 in. Strong-Drive SDS Heavy-Duty Connector screws in all round holes - using the specified fasteners is essential; lag screws must not be substituted, as they will not achieve the same load values the SDS screws are engineered to deliver.
• Gray paint finish - provides a consistent, clean appearance and a baseline level of corrosion resistance suitable for structural pier cap applications.
• Non-corner pier location design - the geometry is optimized specifically for mid-run floor support beam connections, ensuring proper fit and load transfer at non-corner locations without requiring field modification.
• Domestic manufacturing - produced in the United States under Simpson's quality standards, supporting traceability and consistency across structural connectors in the same project.

Why This Product

• A system-matched solution for high-wind construction - the CCQM4.62-SDS is specifically engineered to pair with SSTB anchor bolts, meaning the uplift and lateral resistance it provides is part of a coordinated, tested assembly rather than a standalone component guessed into service.
• No fastener guesswork - the connector ships with the required 1/4 in. x 2-1/2 in. Strong-Drive SDS Heavy-Duty Connector screws, and the load values are tied directly to those screws, so builders know exactly what hardware delivers the rated performance.
• Purpose-built for pier and CMU column applications - whether the project involves concrete columns or concrete masonry unit piers, this cap is an approved fit for both substrate types, reducing the need to source different hardware for similar foundation conditions on the same job.
• Simpson engineering behind a specialized connector - for structural applications where raised pier foundations meet heavy beam loads, specifying a connector from a recognized structural hardware manufacturer helps support code compliance and inspector confidence on permitted projects.

Specifications

• Manufacturer Part Number (MPN): CCQM4.62-SDS
• Manufacturer: Simpson Strong-Tie Company Inc
• Width: 4-5/8"
• Length: 11"
• Finish: Gray Paint
• Included Fasteners: 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector Screws
• Country of Origin: United States

Approved Applications

• Raised pier foundation systems
• Applications where heavy beams rest on concrete columns
• Applications where heavy beams rest on concrete masonry unit (CMU/concrete block) columns
• Floor support beam connections at non-corner pier locations
• High-wind regions requiring elevated uplift and lateral resistance

What's Included

• 1 x CCQM4.62-SDS Column Cap
• 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector Screws

Note: Product dimensions and/or screw holes may differ from picture.

Frequently Asked Questions

What type of fasteners are required for this column cap, and can lag screws be substituted?

The CCQM4.62-SDS requires 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector screws installed in all round holes. Lag screws must not be substituted, as they will not achieve the same load values that the SDS screws are engineered to deliver.

Is this column cap suitable for corner pier locations?

No. The CCQM4.62-SDS is specifically designed for non-corner, floor support beam locations in raised pier foundations. It is not intended for corner pier applications.

What anchor bolt system is this column cap designed to work with?

This column cap is engineered to work in conjunction with Simpson Strong-Tie SSTB anchor bolts. The SSTB offset allows for flush installation to the edge of a pier, and the SSTBs are spaced to fit standard CMU cells.

Can this column cap be configured for different beam sizes or beam-to-beam combinations?

Yes. While the standard CCQM4.62-SDS has a width of 4-5/8" and a length of 11", configurations for many different beams or beam-to-beam combinations can be manufactured as configurable options or special orders. You would need to contact Simpson Strong-Tie directly for those options.