Product Description
The Simpson RP6 Steel Retrofit Plate by Simpson is engineered to be installed on the outside of masonry buildings to help tie the walls to the roof or floor structure. Made from 3/8-in. steel with a Simpson Strong-Tie gray paint finish, this retrofit plate meets IEBC prescriptive requirements for both unreinforced masonry and multi-wythe solid brick walls - giving structural designers and contractors a code-compliant, field-ready solution for masonry wall retrofit applications.
Key Features
- 6-in. x 5-3/4-in. octagon design meets code-required 30 square inches of area - satisfies IEBC prescriptive area requirements right out of the box, eliminating guesswork on compliance for unreinforced masonry and multi-wythe solid brick retrofit projects.
- Accommodates multiple rod diameters based on the designer's load demands - gives engineers the flexibility to tailor the connection to project-specific structural requirements rather than being locked into a single configuration.
- Typically used in conjunction with a holdown in retrofit applications - integrates smoothly into a complete lateral force-resisting system, streamlining the retrofit assembly process on-site.
- Made from 3/8-in. steel - provides the robust thickness needed to handle the bearing and transfer loads common in masonry wall-to-roof and wall-to-floor tie applications.
- Simpson Strong-Tie gray paint finish - offers a consistent, clean appearance on exterior masonry surfaces while providing a protective coating over the steel plate.
Why This Product
- Built for code compliance from the start - the RP6 meets IEBC prescriptive requirements for unreinforced masonry and multi-wythe solid brick walls, so contractors and designers can move forward with confidence rather than spending time verifying area calculations.
- Engineered and tested to Simpson quality standards - Simpson connectors are manufactured to rigorous quality benchmarks, meaning this retrofit plate delivers the structural performance you can rely on in demanding masonry retrofit scenarios.
- Flexible rod diameter compatibility - the ability to accommodate multiple rod diameters lets the design team optimize load capacity for the specific demands of each job, reducing the need for custom hardware or special modifications.
- Purpose-built for exterior masonry retrofit work - designed specifically for installation on the outside of masonry buildings in conjunction with a holdown, the RP6 addresses a defined application gap that general-purpose hardware cannot reliably fill.
Specifications
- Model Number: RP6
- Width: 6 in.
- Length: 5-3/4 in.
- Thickness: 3/8 in.
- Bolt/Rod Diameter: 3/4 in.
- Coating/Finish: Simpson Strong-Tie Gray Paint
- Country of Origin: United States
Approved Applications
- Installation on the outside of masonry buildings to tie walls to the roof or floor structure
- Unreinforced masonry wall retrofit applications
- Multi-wythe solid brick wall retrofit applications
- Use in conjunction with a holdown in retrofit applications
Frequently Asked Questions
What rod diameter is the RP6 designed to install with?
The RP6 is designed to install with a 3/4-in. diameter rod. However, it can accommodate multiple rod diameters based on the designer's load demands.
What code requirements does the RP6 meet?
The RP6 meets IEBC prescriptive requirements for both unreinforced masonry and multi-wythe solid brick walls, and its 6-in. x 5-3/4-in. design meets the code-required 30 square inches of area.
Where is the RP6 intended to be installed?
The RP6 is designed to be installed on the outside of masonry buildings to help tie the walls to the roof or floor structure. It is typically used in conjunction with a holdown in retrofit applications.
What material and finish is the RP6 made from?
The RP6 is made from 3/8-in. steel and features a Simpson Strong-Tie gray paint finish.
Reviews
FAQs
Standard Shipping is free on most orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.