The Simpson 4.62 in End Column Cap L-Shaped for GFCMU and Concrete Piers is a heavy-duty corner column cap built for raised pier foundation construction where large beams bear down on concrete or grouted filled concrete masonry unit columns. Engineered by Simpson in an L-shaped configuration, this column cap delivers robust uplift and lateral load resistance at building corners, making it a dependable choice for high-wind applications and structural connections that demand long-term performance. The kit arrives with MSTQM straps and 1/4 in. x 2 1/2 in. Strong-Drive SDS Heavy-Duty Connector screws, giving installers everything needed to form a complete column-to-beam connection.

Key Features

• L-shaped end/corner configuration - positions the cap precisely at building corners where a standard inline cap cannot provide proper beam bearing, eliminating the need for field fabrication at critical structural junctions.
• 7-gauge steel construction - provides the heavy-gauge strength required to transfer substantial beam loads safely down into concrete or CMU pier columns without deforming under load.
• Hot-dip galvanized finish - delivers superior corrosion protection suited to demanding outdoor and exposed foundation environments, helping the connection maintain its structural integrity over time.
• Complete kit with MSTQM straps and SDS screws - everything necessary for a code-consistent installation arrives together, reducing trips to the supplier and ensuring the correct fasteners are used from the start.
• Engineered for uplift and lateral resistance - the cap is specifically designed to resist the forces generated during high-wind events, supporting structures in regions with strict wind-load requirements.
• Compatible with GFCMU and concrete pier columns - works across both grouted filled concrete masonry unit piers and solid concrete piers, giving contractors flexibility across common raised foundation systems.
• Made in the United States - domestic production supports consistent manufacturing quality and reliable dimensional accuracy for structural connector applications.

Why This Product

• Purpose-built for corner pier applications - the L-shaped geometry solves a real-world framing challenge at building corners, where a straight column cap leaves beams without adequate bearing surface, making this cap the correct solution rather than a workaround.
• Kit format removes fastener guesswork - because the included 1/4 in. x 2 1/2 in. Strong-Drive SDS screws are matched to the cap's design load values, installers get the intended uplift performance without substituting fasteners that could compromise the connection.
• Corrosion-resistant finish extends service life - hot-dip galvanization on 7-gauge steel means the cap holds up in the exposed, moisture-prone conditions typical of raised pier foundations, protecting the structural connection for the long term.
• Trusted Simpson engineering - designed by Simpson, a brand with a well-established reputation in structural connectors, this cap is engineered to meet the demands of raised pier and high-wind construction with clearly defined load values and installation requirements.

Specifications

• Manufacturer Part Number (MPN): ECCLQM4.62G-KT
• Main Channel Width (W1): 4 5/8 in.
• Side Stirrup Width (W3 and W4): 4 5/8 in.
• Main Channel Length (L1): 11 1/2 in.
• Side Stirrup Length (L2): 7 3/4 in.
• Material: 7-Gauge Steel
• Finish: Hot-Dip Galvanized
• Configuration: L-Shaped (End/Corner)
• Country of Origin: United States

Approved Applications

• Raised pier foundation construction at building corners
• Applications where heavy beams rest on concrete columns
• Applications where heavy beams rest on concrete block (CMU) columns
• High-wind resistance connections requiring uplift and lateral load resistance
• GFCMU (Grouted Filled Concrete Masonry Unit) pier applications
• Concrete pier column-to-beam connections

What's Included

• ECCLQM4.62G end column cap (L-shaped)
• MSTQM straps for wall framing connection
• 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector screws (configured for high uplift design values)

Installation Notes

• Install 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector screws (provided) in all round holes. Note: Lag screws will not achieve the same load.
• Minimum (4) #7 vertical rebar required (total for pier).

Options

• Contact us for Configurable Options and Special orders
• Available in widths up to nominal 7-1/8" width.
• For variable widths on side stirrups, specify W3 (3 1/4" to 7 1/8") and add an "X" to the end of the core model name. Example: ECCLQM5.50GX-KT, W3 = 3 5/8".

Frequently Asked Questions

What type of foundation is the ECCLQM4.62G-KT designed for?

This column cap is designed specifically for raised pier foundations, including applications with GFCMU (glass-fiber concrete masonry unit) columns and concrete piers. It is intended for use at building corners where heavy beams bear down on concrete or concrete block columns.

What is included in the ECCLQM4.62G-KT kit?

The kit includes the L-shaped end column cap itself, MSTQM straps, and screws. Together, these components provide a complete, ready-to-install solution that connects the column cap to wall framing and delivers high uplift design values.

What anchor bolts are compatible with the ECCLQM4.62G-KT?

The ECCLQM4.62G-KT is designed to work in concert with Simpson Strong-Tie SSTB anchor bolts. The SSTB offset allows for flush installation to the edge of the pier, and the SSTBs are spaced to fit standard CMU cells.

What material and finish does the ECCLQM4.62G-KT use for corrosion protection?

The ECCLQM4.62G-KT is constructed from heavy 7-gauge steel and finished with a hot-dip galvanized coating, providing long-term corrosion resistance suited for demanding environments.