The Simpson CCTQM3.62-SDS T-Shape Column Cap is a heavy-duty structural connector engineered for raised pier foundation systems where heavy beams bear on grouted fully-filled concrete masonry unit (GFCMU) columns or concrete piers. Its T-shape geometry positions it as the go-to solution for non-corner, intermediate floor support beam locations, with a side stirrup that allows intersecting beams to connect at precise 90 deg. angles. Included 1/4" x 2 1/2" Strong-Drive SDS Heavy-Duty Connector screws come pre-selected to maximize uplift design values right out of the box, making this column cap a dependable choice for high-wind region construction where certified uplift and lateral resistance are required.

Key Features

• T-shape geometry with integrated side stirrup - supports intersecting beams at 90 deg. angles, making it purpose-built for intermediate pier positions rather than corner locations, so beam layout stays clean and structurally sound.
• Compatible with GFCMU and concrete pier systems - works directly with grouted fully-filled concrete masonry unit columns and poured concrete piers, covering the two most common raised pier foundation column types without requiring adapters.
• 3 5/8 in. main channel and matching side stirrup width - the consistent channel dimensions across both the primary and intersecting beam pockets accommodate common lumber sizing, reducing on-site fitting adjustments.
• Includes 1/4" x 2 1/2" Strong-Drive SDS Heavy-Duty Connector screws - fasteners arrive pre-selected and included so installers can achieve the rated uplift and lateral resistance values immediately, with no separate hardware purchase needed.
• 7-gauge steel construction with gray paint finish - the heavy-gauge steel provides the structural strength demanded by high-wind applications, while the painted finish offers a consistent appearance once the connection is complete.
• Domestic production - manufactured in the United States under Simpson quality controls, giving builders confidence in consistent dimensional accuracy across job-site quantities.

Why This Product

• Solves the intermediate pier problem - most standard column caps are designed for corner or single-beam applications. The T-shape design specifically addresses the non-corner pier position where a primary beam and a crossing beam both need rigid, rated connections to a single column, reducing the need for field-fabricated solutions.
• Uplift and lateral resistance rated for demanding conditions - this connector is engineered to meet the elevated loading requirements of high-wind construction, giving builders and inspectors a code-supportable connection at every embedded pier cap location.
• Fasteners included and already optimized - rather than sourcing compatible hardware separately, buyers receive the correct Strong-Drive SDS screws with the connector, pre-matched to the design values, which keeps installation straightforward and reduces the risk of using an under-rated fastener.
• Broad pier system compatibility - acceptance for both GFCMU piers and concrete pier foundations means one part number covers multiple pier types on the same project, simplifying procurement and reducing the chance of a mis-ordered component holding up foundation work.

Specifications

• Model Number: CCTQM3.62-SDS
• Main Channel Width (W1): 3 5/8 in.
• Side Stirrup Width (W3 and W4): 3 5/8 in.
• Main Channel Length (L1): 11 1/2 in.
• Side Stirrup Length (L2): 4 in.
• Material: 7 Gauge Steel
• Finish: Gray Paint
• Fasteners Included: 1/4" x 2 1/2" Strong-Drive SDS Heavy-Duty Connector Screws
• Country of Origin: United States

Approved Applications

• Raised pier foundations where heavy beams rest on concrete or concrete masonry unit (CMU) columns
• Floor support beam locations at non-corner pier positions
• Intermediate beam-to-beam connections at 90-degree angles using the side stirrup
• High-wind region construction requiring certified uplift and lateral resistance
• Applications using GFCMU (Grouted Fully-filled Concrete Masonry Unit) piers
• Concrete pier foundation systems requiring embedded column cap connections

What's Included

• 1x CCTQM3.62-SDS T-Shape Column Cap
• 1/4" x 2 1/2" Strong-Drive SDS Heavy-Duty Connector Screws

Options & Custom Configurations

Configurations for many different beams or beam-to-beam combinations can be manufactured. for configurable options