The Freud 350mm 84-Tooth Aluminum and Non-Ferrous Saw Blade is a professional-grade, carbide-tipped cutting tool engineered specifically for slicing through aluminum, brass, copper, plastic, and vinyl with precision and control. Featuring a triple chip grind geometry and a protective Silver I.C.E. Coating, this blade is purpose-built for medium to thick non-ferrous material cutting on miter saws, stationary table saws, and double miter saws. Whether you are processing drawn aluminum profiles or cutting thick vinyl tubing, this Freud blade delivers clean, consistent results with a design rooted in real-world fabrication demands.

Key Features

• Triple Chip Grind (TCG) tooth geometry - the flat-triple chip tooth profile with a negative -6 deg. hook angle provides a controlled, smooth cut through non-ferrous metals and plastics, reducing grabbing and improving operator safety.
• Silver I.C.E. Coating on the blade surface - this protective coating prevents material buildup on the blade and keeps the blade running cooler and cleaner during extended cutting sessions, extending usable blade life and maintaining cut quality.
• 84 carbide-tipped teeth at a 350mm diameter - the high tooth count means more cutting edges engage the workpiece per rotation, resulting in finer, cleaner cuts in aluminum, brass, copper, plastic, and vinyl.
• 3.5mm kerf width and 3mm plate thickness - this combination provides a rigid, stable cutting platform while removing just enough material to keep cuts accurate and waste minimal.
• 30mm arbor with multiple pinhole configurations (2/7/42 + 2/9/46.4 + 2/10/60) - broad compatibility across a wide range of professional saws, so this blade fits many existing setups without adapters.
• Compatible with miter saws, stationary table saws, and double miter saws - versatile tool compatibility means the blade integrates into multiple shop workflows rather than being limited to a single machine type.
• Designed for drawn products and tubes with thickness exceeding 5mm - purpose-matched to medium to thick workpieces, so the blade geometry and tooth count are optimized for the exact material range it will encounter.

Why This Product

• The Silver I.C.E. Coating actively prevents resin and material buildup, meaning the blade stays cleaner during use and requires less frequent cleaning or replacement - a direct time and cost benefit in high-volume cutting environments.
• With 84 teeth and a TCG grind, this blade is configured specifically for non-ferrous metals and plastics, so you are not making do with a general-purpose blade - you are using a tool matched to the actual demands of cutting aluminum, brass, copper, and similar materials.
• The -6 deg. hook angle reduces the tendency of the blade to grab the workpiece, which matters when cutting soft metals like aluminum and copper where an aggressive hook can cause dangerous kickback or poor cut quality.
• Multiple pinhole configurations and a 30mm arbor give this 350mm blade the flexibility to mount on a variety of professional saw platforms, making it a practical investment for shops that run more than one type of stationary or miter saw.

Specifications

• Brand: Freud
• Product Group: Saw Blades
• Category: Aluminum and Plastics
• Sub Category: Aluminum and Non-Ferrous (Medium to Thick)
• Diameter: 350mm
• Teeth: 84
• Arbor: 30mm
• Kerf: 3.5mm
• Plate: 3mm
• Hook Angle: -6 deg.
• Grind: TCG
• Pinholes: 2/7/42 + 2/9/46.4 + 2/10/60
• Compatible Tools: Miter Saw; Stationary Table Saw; Double Miter Saw
• Materials: Plastic; Vinyl; Aluminum; Brass; Copper
• Pack Quantity: 1
• Country of Origin: Italy

Approved Applications

• Sawblades to cut aluminum and non-ferrous metals
• Cutting drawn products and tubes whose thickness exceeds 5mm
• Use with the sawblade over the workpiece to be cut for recommended results

Frequently Asked Questions

What materials can this Freud 350mm blade cut?

This blade is designed to cut plastic, vinyl, aluminum, brass, and copper. It is specifically suited for drawn products and tubes whose thickness exceeds 5mm, making it the right choice for medium to thick non-ferrous workpieces.

What is the recommended cutting orientation when using this blade?

It is recommendable to use this blade with the sawblade over the workpiece to be cut. This orientation supports cleaner cutting performance for the tube and drawn-product applications the blade is designed to handle.

What does the Silver I.C.E. Coating do, and why does it matter?

The Silver I.C.E. Coating prevents buildup on the blade surface and keeps the blade running cooler and cleaner. For non-ferrous metal cutting, where soft materials like aluminum and copper can stick to blade surfaces, this coating helps maintain consistent cut quality and extends the working life of the blade.

Which saws is this 350mm blade compatible with?

This blade is designed for use with a miter saw, stationary table saw, or double miter saw. The 30mm arbor combined with pinhole configurations of 2/7/42, 2/9/46.4, and 2/10/60 provides compatibility across a broad range of professional saw setups.