The DEWALT D100 Self Retracting Lifeline with 10' Galvanized Cable is an anchor-mounted SRL built for workers who need dependable, full-range fall protection across construction and general industry job sites. The 3/16" galvanized steel cable and impact indicating snap hook at the harness end work together to reduce free fall distance and arrest forces on the body, keeping workers safer during every shift at height. Compliant with ANSI Z359.14-2021 Class 1, OSHA 1926.502, and OSHA 1910.66, this rugged, lightweight lifeline delivers certified protection without slowing the worker down.

Key Features

• 10' (3.05 M) Working Length with 3/16" (4.8 mm) Galvanized Steel Cable - the retractable galvanized steel lifeline stays taut as workers move, minimizing slack and reducing trip hazards so workers can cover their work area with greater confidence and freedom of motion
• Rated to ANSI 310 lbs. (141 kg) and OSHA 420 lbs. (191 kg) - dual weight ratings cover a broad range of workers and satisfy both ANSI and OSHA capacity requirements in a single unit, removing the guesswork from compliance across construction and general industry applications
• High Impact Strength Polymer Housing with Recessed Labels - the rugged polymer housing stands up to demanding job site conditions while recessed labeling protects critical safety markings from wear, keeping compliance information legible throughout the life of the unit
• Impact Indicating Snap Hook at Harness End - delivers an immediate visual signal if the connector has been subjected to a fall event, allowing supervisors and workers to quickly identify when the unit must be removed from service and inspected before being returned to use
• 3,600 lb. (16kN) Gate Steel Carabiner at Anchor End - the galvanized alloy steel carabiner with golden yellow/silver passivation provides a high-strength, corrosion-resistant connection to structural anchor points, supporting reliable tie-off in a wide range of environments
• 3,600 lb. (16kN) Gate Steel Snap Hook at Harness Connector - the matching galvanized alloy steel snap hook with passivation finish creates a secure, consistent connection to the worker's harness D-ring, so the harness end holds as dependably as the anchor end
• Lightweight at 6.44 lbs. (2.92 kg) - the compact, low-profile design reduces the physical burden on workers during extended shifts, making it easier to stay productive at height without the fatigue that comes with heavier fall protection equipment
• Trip-Free Connector Design - smooth lifeline travel with minimal snagging keeps workers moving freely through their tasks, reducing the risk of accidental falls caused by equipment catching on structures or gear
• Meets ANSI Z359.14-2021 Class 1, OSHA 1926.502, and OSHA 1910.66 - compliance with both construction and general industry standards means this SRL satisfies regulatory requirements across multiple work environments without requiring additional verification or separate equipment
• 2-Year Warranty - DEWALT backs this SRL with a 2-year warranty, giving buyers confidence that their investment in fall protection equipment is supported over time on the job site

Why This Product

• Reduces free fall and arrest forces on the body - the self retracting mechanism keeps the lifeline taut, limiting free fall distance so that if a fall occurs, the forces transmitted to the worker are lower than with a standard lanyard - a direct safety advantage on any elevated work site
• Built-in impact indication removes the guessing after a fall event - the impact indicating snap hook at the harness end gives supervisors a clear, visible signal when the unit has been loaded in a fall, making post-incident inspections faster and more reliable and reducing the risk of a compromised unit being returned to service
• One SRL for both ANSI and OSHA compliance - rated to ANSI 310 lbs. (141 kg) and OSHA 420 lbs. (191 kg) and certified to ANSI Z359.14-2021 Class 1, OSHA 1926.502, and OSHA 1910.66, this unit covers regulatory requirements across construction and general industry without the need for separate equipment for each environment
• Rugged construction designed for long service life - the high impact strength polymer housing with recessed labels and galvanized steel cable resist damage and corrosion in demanding conditions, supported by a 2-year warranty that reflects the durability built into the unit from the start

Specifications

• Brand: DEWALT
• MPN: DXFP210111-010
• Model Series: D100
• Working Length: 10' (3.05 M)
• Lifeline Material: 3/16" (4.8 mm) Galvanized Steel Cable
• Max Capacity (ANSI): 310 lbs. (141 kg)
• Max Capacity (OSHA): 420 lbs. (191 kg)
• Housing: High Impact Strength Polymer
• Anchor End Connector: 3,600 lb. (16kN) gate Steel (galvanized alloy steel with golden yellow/silver passivation) Carabiner
• Harness Connector: Impact Indicating 3,600 lb. (16kN) gate Steel (galvanized alloy steel with golden yellow/silver passivation) Snap Hook
• Weight: 6.44 lbs. (2.92 kg)
• Color: Black/Gold
• Standards: ANSI Z359.14-2021 Class 1, OSHA 1926.502 and 1910.66
• Warranty: 2 years
• Unit of Measure: 1 Each

Frequently Asked Questions

What standards does the DEWALT DXFP210111-010 Self Retracting Lifeline comply with?

This SRL meets ANSI Z359.14-2021 Class 1, OSHA 1926.502, and OSHA 1910.66 - covering both construction and general industry fall protection applications.

What is the maximum weight capacity for this SRL?

The DEWALT D100 SRL is rated to a maximum capacity of 310 lbs. (141 kg) per ANSI standards and 420 lbs. (191 kg) per OSHA standards.

What does the impact indicating hook do, and why does it matter?

The impact indicating snap hook at the harness end provides a visible indication if the unit has experienced a fall arrest event. This allows workers and supervisors to immediately identify the need for inspection and removal from service, which is an important part of maintaining a compliant fall protection program.

What is included with the DEWALT D100 10' Galvanized Cable SRL?

Each unit includes the Self Retracting Lifeline and an Anchorage Adapter, providing everything needed to connect the SRL to a compatible anchor point at the job site.