The BN Products-USA, LLC #6 Diamond Rebar Bender is a versatile electric rebar bending tool built for demanding job site and shop use. Capable of bending up to 3/4 in. #6 grade 60 rebar (20 mm), this unit delivers fast, precise bends for concrete construction and reinforcement work. It can be mounted on the back of a truck for on-site convenience or set up in a fixed shop location, making it a flexible solution for contractors who need reliable rebar bending performance wherever the job takes them.

Key Features

• Bends up to #6 grade 60 rebar - handles 3/4 in. (20 mm) rebar so you can tackle a wide range of concrete reinforcement applications without swapping tools
• Pre-set angle locking dial - locks in your target bend angle before you start, reducing guesswork and producing consistent, repeatable bends across every piece of rebar
• 180 deg. bends in 6 seconds - rapid cycle time keeps production moving on busy job sites, cutting down manual labor time significantly
• Foot pedal included - hands-free activation lets you hold and guide the rebar while the machine does the bending, improving safety and control
• Runs on as little as 2000 Watts or standard 115-volt power - compatible with a small portable generator or a standard outlet, so you can operate it at remote job sites or in the shop without special electrical infrastructure
• Truck-mount capable - designed to mount on the back of a truck, bringing the bending capability directly to the work site and eliminating unnecessary trips back to a shop

Why This Product

• For contractors and crews working on concrete reinforcement projects, the ability to mount this rebar bender on a truck means bending #6 grade 60 rebar happens right at the job site - no separate shop run required
• The 2000-Watt minimum power requirement means a small portable generator is all you need to operate this electric rebar bender at locations without grid power, keeping your project on schedule
• With 180 deg. bends completed in as little as 6 seconds and a pre-set angle locking dial, you get repeatable, accurate bends quickly - reducing rework and material waste on construction projects
• The included foot pedal frees both hands to control the rebar during the bending cycle, making this a safer and more ergonomic option compared to manually operated rebar benders

Specifications

• Manufacturer: BN Products-USA, LLC
• Model Number: DBD-20M
• Maximum Rebar Size: #6 (3/4 in. / 20 mm) grade 60
• Minimum Power Requirement: 2000 Watts
• Power Supply: 115-volt standard
• Maximum Bend Angle: 180 deg.
• Bend Time for 180 deg.: 6 seconds
• Weight: 245 lb.

What's Included

• BN DBD-20M #6 Diamond Rebar Bender
• 6 rollers with steel toolbox
• Foot pedal control
• Operator manual
• One-year manufacturer warranty

Frequently Asked Questions

What is the largest rebar this bender can handle?

The DBD-20M is designed to bend rebar up to 3/4 in. #6 grade 60 rebar (20 mm). It is not rated for rebar larger than #6.

Can this rebar bender be used at a job site without access to grid power?

Yes. The unit can be powered by a generator as small as 2000 Watts, making it practical for remote job sites. It also runs on standard 115-volt power when a standard outlet is available.

Is this unit portable or does it need to be installed permanently?

The DBD-20M is designed for both portability and fixed use. It can be mounted on the back of a truck for on-site rebar bending, or it can be set up in a shop location for stationary use.

How fast can the DBD-20M complete a full 180 deg. bend?

The unit is capable of completing a 180 deg. bend in approximately 6 seconds. The pre-set angle locking dial also allows you to set a specific angle for consistent, repeatable bends throughout your work session.