The Simpson HU Heavy Face-Mount Joist Hanger is an engineered structural connector built for applications demanding superior strength and elevated safety factors. Designed as a heavy-duty, face-mount hanger, select models can be configured with a skewable seat and a sloping seat capable of angling up to 45 deg., making this connector a versatile solution for complex framing geometries where standard hangers fall short.

Key Features

• Heavy-duty face-mount design engineered for connections requiring additional strength and safety factors
• Select models feature a skewable seat for angled installations
• Seat can slope up to 45 deg. on applicable models
• Manufactured by Simpson Strong-Tie to meet standardized hanger testing requirements
• Gauge may vary from that specified

Specifications

• Manufacturer Part Number (MPN): HU CUSTOM MADE
• Brand: Simpson Strong-Tie
• Type: Heavy Face-Mount Joist Hanger
• Mount Style: Face-Mount
• Maximum Seat Slope: Up to 45 deg.
• Material Gauge: May vary from that specified

Approved Applications

• Structures requiring additional strength and elevated safety factors beyond standard hanger capacity
• Framing connections involving sloped or skewed joist configurations up to 45 deg.
• Installations where face-mount connectivity is required between joists and header members

Important Technical Notes

The following information applies only to hangers manufactured by Simpson Strong-Tie and installed per Simpson Strong-Tie instructions. Some combinations of hanger options on a single hanger have not been evaluated. In some cases, combinations of options cannot be manufactured. A qualified designer must always evaluate each connection, including header and joist limitations, before specifying the product.

Testing is performed using a standardized hanger test method. The joist in the test setup may include the minimum amount of structural stability where appropriate. For example, the sloped down hanger tests are assembled with a joist cut on the lower end to lie flush with a wood member attached with three 8d common toenails. Header and other attached structural members are assumed fixed in actual installations. Horizontal loads induced by sloped joists must be resisted by other members in the structural system.

Custom Order

This product is a custom-configured part. To discuss your specific requirements, Contact us.

Note: Product dimensions and/or Screw or Bolt holes may differ from picture. Product dimensions and/or Screw or Bolt holes may differ from picture. Dimensions and/or Screw or Bolt holes may differ from picture.

Frequently Asked Questions

What makes the HU Heavy Face-Mount Joist Hanger different from a standard joist hanger?

The HU series is a heavy-duty face-mount hanger engineered specifically for connections requiring additional strength and elevated safety factors beyond what standard hangers are designed to provide. It is intended for applications where a typical hanger's capacity is insufficient.

Can this hanger accommodate sloped or skewed framing configurations?

Yes, on select models the seat is skewable and can also slope up to 45 deg., making the HU hanger suitable for complex framing geometries where joists are installed at an angle rather than level and square.

Will the material gauge always match what is specified?

Not necessarily. The gauge of the hanger may vary from that specified. If gauge is a critical factor for your application, verify the exact gauge of the unit you receive before installation.

Are there any installation requirements specific to this hanger?

Yes. The load and performance information for this hanger applies only when it is manufactured by Simpson Strong-Tie and installed strictly per Simpson Strong-Tie instructions. Deviating from the manufacturer's installation guidelines may affect the connector's rated performance and safety.