The Simpson Strong-Tie ECCQ96SDS2.5ROT is an 8-3/4" beam, 6x post end column cap engineered to deliver strong, reliable column-to-beam connections in end-of-beam applications throughout wood construction. Featuring rotated straps and fabricated from heavy-duty 3-gauge steel with a Simpson Strong-Tie Gray paint finish, this column cap is built to perform in demanding structural environments. The seat of the column cap provides an extended bearing surface that reaches beyond the side of the column, helping to distribute loads from the beam while providing critical support for the connection. The ECCQ96SDS2.5ROT comes complete with Strong-Drive SDS Heavy-Duty Connector screws for fast, efficient installation straight out of the box.

Key Features

• Extended Bearing Surface: The seat extends beyond the column side to distribute load from the beam and enhance connection support.
• Strong-Drive SDS Screws Included: Attaches to a greater net section area of the column compared to standard bolt attachment, improving load transfer.
• Low-Profile Fastening: SDS screws provide a lower profile than standard through-bolts for a cleaner, more streamlined installation.
• Certified Welds: Engineered with certified welds for confidence in strength and load performance.
• Enhanced Uplift Loads: Uplift loads have been increased to accommodate earthquake or wind loading demands.
• Diamond Holes: Included for convenient temporary fastening during positioning and alignment.
• Rotated Straps: Straps are rotated 90 deg. for specialized installation configurations.
• Made in the USA: Manufactured in the United States.

Specifications

• Model Number: ECCQ96SDS2.5ROT
• Beam Width: 8-3/4 in.
• Dimension W1: 8-7/8 in.
• Dimension W2: 5-1/2 in.
• Dimension L: 8-1/2 in.
• Dimension H: 7 in.
• Material: 3-Gauge Steel
• Finish: Simpson Strong-Tie Gray Paint
• Fastener Type: 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector Screws
• Country of Origin: United States

Approved Applications

• End-of-beam column-to-beam connections in wood construction
• Structural applications requiring enhanced uplift resistance due to seismic (earthquake) loading
• Structural applications in high-wind load zones requiring increased uplift capacity
• Post-and-beam construction requiring strong, certified welded column cap connections
• Installations where a low-profile screw connection is preferred over standard through-bolt assembly

What's Included

• 1x ECCQ96SDS2.5ROT End Column Cap (Rotated Straps)
• 14x 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector Screws (Beam)
• 14x 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector Screws (Post)

Installation

Fasten with the included 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector

Options

• Contact us for Configurable Options and Special orders

Frequently Asked Questions

What beam and post sizes is the ECCQ96SDS2.5ROT designed for?

The ECCQ96SDS2.5ROT is designed for use with an 8-3/4" beam and a 6x post, making it suitable for end-of-beam column-to-beam connections in wood construction applications.

What does "rotated straps" mean on this column cap?

Rotated straps means the straps on this column cap have been repositioned or rotated from their standard orientation, which is reflected in the "ROT" designation in the model number. This configuration is intended for specific installation scenarios where the standard strap orientation would not be suitable.

Are fasteners included with this column cap, and what type are they?

Yes, the ECCQ96SDS2.5ROT comes complete with Strong-Drive SDS Heavy-Duty Connector screws. These screws attach to a greater net section area of the column compared to standard bolt attachment, offer a lower profile than standard through-bolts, and are included for fast, efficient installation straight out of the box.

What material and finish is this column cap made from?

The ECCQ96SDS2.5ROT is fabricated from heavy-duty 3-gauge steel and features a Simpson Strong-Tie Gray paint finish, making it well-suited for demanding structural environments.