The Simpson BA2.56/28 BA Series Top-Flange Joist Hanger is a cost-effective structural connector engineered for both engineered wood and solid sawn lumber applications. Designed to carry medium loads with solid sawn lumber and higher loads with engineered wood products, this hanger delivers reliable performance for a wide range of framing conditions. The BA2.56/28 accommodates an actual joist size of 2-1/2 in. x 28 in. and is constructed from 12-gauge steel with a G90 zinc galvanized finish for enhanced corrosion resistance. Min./max. nailing options provide design versatility to meet varying load demands on the job site.

Features

• The two-level embossment at the top flange provides increased stiffness
• The full-height joist flange captures the top chord of the joist to prevent rotation and eliminate the need for web stiffeners
• Minimum nailing targets moderate load demands, whereas maximum nailing allows higher loads
• Available for special order to accommodate sloped and/or skewed members
• Actual joist size: 2-1/2 in. x 28 in.
• Made from 12-gauge steel
• Galvanized (G90) for extra corrosion resistance

Specifications

• Model Number: BA2.56/28
• Member Size: 2-1/2 in. x 28 in.
• Gauge: 12
• W (in.): 2 4/7
• H (in.): 28
• B (in.): 3
• TF (in.): 2-1/2
• Coating / Finish: Zinc Galvanized, G90
• Country of Origin: United States

Approved Applications

• Engineered wood product framing applications requiring top-flange support
• Solid sawn lumber framing at medium load conditions
• High-load engineered wood product installations where maximum nailing is applied
• Framing situations where preventing joist rotation is critical, eliminating the need for web stiffeners
• Sloped and/or skewed framing configurations (available for special order; see Options below)

Installation

Install with 0.162 in. x 3-1/2 in. nails in the header and 0.148 in. x 1-1/2 in. nails in the joist. Minimum nailing targets moderate load demands; maximum nailing allows higher loads. Refer to load tables for nailing schedules appropriate to your specific design requirements.

Options

• Other widths are available; specify W dimension (the minimum W dimension is 1 9/16").
  
• For modified hangers, fastener quantity listed in tables may need to increase depending on joist size, skew and slope. All modified hangers are 12 ga.
• Hangers may be modified for slopes and/or skews up to 45 deg.. The top flanges may be sloped as much as 35 deg. and may be open or closed up to 30 deg.. See Modifications and Associated Load Reductions under Specifications
• Contact us for Customizations and Special orders

Frequently Asked Questions

Frequently Asked Questions

What joist size does the BA2.56/28 accommodate?

The BA2.56/28 is designed to accommodate an actual joist size of 2-1/2 in. x 28 in. It is intended for use with both engineered wood products and solid sawn lumber of that member size.

What nails should be used to install this hanger?

Install the BA2.56/28 with 0.162 in. x 3-1/2 in. nails in the header and 0.148 in. x 1-1/2 in. nails in the joist. The hanger offers minimum and maximum nailing options, where minimum nailing targets moderate load demands and maximum nailing allows for higher loads.

Is this hanger suitable for sloped or skewed framing conditions?

The standard BA2.56/28 is designed for typical framing applications, but it is available for special order to accommodate sloped and/or skewed members, making it adaptable to more complex framing conditions.

What material and finish is the BA2.56/28 made from?

The BA2.56/28 is constructed from 12-gauge steel with a G90 zinc galvanized coating for extra corrosion resistance, making it suitable for use in environments where moisture exposure is a concern.