The Simpson BA2.56/26 is a top-flange joist hanger engineered for use with 2-1/2 in. x 26 in. engineered wood and solid sawn lumber members. Part of Simpson's cost-effective BA series, this hanger is designed to carry medium loads with solid sawn lumber and higher loads with engineered wood products. Built from 12-gauge steel with a G90 zinc galvanized finish for enhanced corrosion resistance, the BA2.56/26 delivers structural reliability and design versatility through min./max. nailing options to meet a range of load demands.

Features

• The two-level embossment at the top flange provides increased stiffness
• The full-height joist flange captures the top chord of the joist to prevent rotation and eliminate the need for web stiffeners
• Minimum nailing targets moderate load demands, whereas maximum nailing allows higher loads
• Available for special order to accommodate sloped and/or skewed members
• Actual joist size: 2-1/2 in. x 26 in.
• Made from 12-gauge steel
• Galvanized (G90) for extra corrosion resistance

Specifications

• Model Number: BA2.56/26
• Member Size: 2-1/2 in. x 26 in.
• Steel Gauge: 12
• W (in.): 2 4/7
• H (in.): 26
• B (in.): 3
• TF (in.): 2-1/2
• Coating / Finish: Zinc Galvanized, G90
• Country of Origin: Canada

Approved Applications

• Engineered wood product (EWP) framing connections requiring top-flange support
• Solid sawn lumber joist-to-header connections at moderate to medium load levels
• Installations where prevention of joist rotation is critical, eliminating the need for web stiffeners
• Framing assemblies requiring design versatility through variable nailing schedules

Installation

Install with 0.162 in. x 3-1/2 in. nails in the header and 0.148 in. x 1-1/2 in. nails in the joist.

• Other widths are available; specify W dimension (the minimum W dimension is 1 9/16").
  
• For modified hangers, fastener quantity listed in tables may need to increase depending on joist size, skew and slope. All modified hangers are 12 ga.
• Hangers may be modified for slopes and/or skews up to 45 deg.. The top flanges may be sloped as much as 35 deg. and may be open or closed up to 30 deg.. See Modifications and Associated Load Reductions under Specifications
• Contact us for Customizations and Special orders

Frequently Asked Questions

Q: What member size is this hanger designed to fit?
A: The BA2.56/26 is designed for members measuring 2-1/2 in. x 26 in., suitable for both engineered wood and solid sawn lumber of that dimension.

Q: How does nailing affect the load capacity of this hanger?
A: Minimum nailing targets moderate load demands, whereas maximum nailing allows higher loads, giving engineers and contractors flexible design options for different structural requirements.

Q: Does this hanger require web stiffeners?
A: No. The full-height joist flange captures the top chord of the joist to prevent rotation and eliminate the need for web stiffeners.

Q: What corrosion protection does the BA2.56/26 offer?
A: This hanger features a G90 zinc galvanized coating, providing an extra layer of corrosion resistance suitable for treated lumber and moisture-exposed environments.

Note: Product dimensions and/or nail holes may differ from picture. Please see item description for specifications.

Frequently Asked Questions

What joist size is the BA2.56/26 designed to fit?

The BA2.56/26 is designed to fit a joist measuring 2-1/2 in. x 26 in. This applies to both engineered wood products and solid sawn lumber members of that size.

What nails should be used to install the BA2.56/26?

Install the BA2.56/26 with 0.162 in. x 3-1/2 in. nails in the header and 0.148 in. x 1-1/2 in. nails in the joist. The hanger supports minimum and maximum nailing options, allowing moderate load demands to be met with minimum nailing and higher loads to be achieved with maximum nailing.

Does the BA2.56/26 work with both engineered wood and solid sawn lumber?

Yes. The BA2.56/26 is designed for use with both engineered wood products and solid sawn lumber. It carries medium loads with solid sawn lumber and is capable of handling higher loads when used with engineered wood products.

Can the BA2.56/26 be used for sloped or skewed installations?

The standard BA2.56/26 is not configured for sloped or skewed members, but it is available for special order to accommodate sloped and/or skewed applications. Contact your supplier to inquire about special order options for non-standard installation angles.