Simpson ECCLR464 L-Shape End Column Cap - 4x Main Beam, 6x Post, 4x Side Beam (Right)

Key Features

• Certified Welds: Assembled with certified welds for confidence in strength and loading performance.
• NDS Code-Compliant Bolt Spacing: Bolt spacing meets NDS code requirements to ensure optimal structural performance.
• Diamond Holes: Integrated diamond holes provide convenient temporary fastening during installation.
• Right-Hand Direction: Skewed right configuration - order model ECCLL for the left-hand direction.
• Nominal Member Sizes: Accommodates a 4x main beam, 6x post, and 4x side beam.
• 7-Gauge Steel Construction: Heavy-duty 7-gauge steel delivers superior strength and durability.
• Simpson Strong-Tie Gray Paint Finish: Factory-applied gray paint finish for corrosion resistance and a professional appearance.

Specifications

• Manufacturer Part Number (MPN): ECCLR464
• Brand: Simpson Strong-Tie
• Member Size: 4x Main Beam, 6x Post, 4x Side Beam
• Direction: Right (Skewed Right)
• Material: Steel
• Gauge: 7-Gauge
• Finish / Coating: Simpson Strong-Tie Gray Paint
• Installation Hardware: Install with 5/8-in. diameter bolts
• Country of Origin: United States

Approved Applications

The ECCLR464 is engineered for use in structural applications where two beams meet at a right-angle "L" formation at the end of a column. Typical uses include:

• Deck framing and outdoor structure beam-to-post connections
• Pergola and arbor timber frame construction
• End-of-beam column cap applications requiring a right-skewed L-shape configuration
• Any structural application requiring a strong, load-distributing connection between a 4x main beam, 6x post, and 4x side beam

Options

• Many combinations of beam and post sizes can be manufactured. Refer to worksheet Options for Multiple-Beam, Bolted Column Caps.
• Contact us for Configurable Options and Special orders
  
• The download shall be determined from the allowable loads for the unmodified product (see ECC column caps). The side beam can take a maximum of 40% of the download and shall not exceed 10,665 lb. The sum of the loads for the side beam(s) and main beam cannot exceed the table load.
• Uplift loads do not apply for ECCL caps.
• The column width in the direction of the main beam width must be the same as the main beam width (W1).
• Specify the stirrup height from the top of the cap. The minimum side stirrup heights (H2 or H3) is 6 1/2" (3 1/2" for models ending in "44").
• The L dimension may vary depending on the width of the side stirrup (W3 or W4).

Frequently Asked Questions

What beam and post sizes does the ECCLR464 accommodate?

The ECCLR464 is sized for a 4x main beam, a 6x post, and a 4x side beam. These are nominal member sizes, and the cap is purpose-built for this specific combination to ensure a proper structural fit.

What is the difference between the ECCLR464 and the ECCLL model?

The ECCLR464 is a right-hand configuration, meaning the side beam extends to the right when viewed from the front. If your project requires a left-hand orientation, you would need to order the ECCLL model instead.

What fasteners are required to install the ECCLR464?

The ECCLR464 should be installed with 5/8-inch diameter bolts. The bolt spacing is designed to meet NDS code requirements to ensure optimal structural performance.

What material and finish is the ECCLR464 made from?

The ECCLR464 is constructed from heavy-duty 7-gauge steel and features a factory-applied Simpson Strong-Tie gray paint finish. It is assembled with certified welds for confidence in strength and loading performance.