The Simpson CCTQ7.1X-SDS Column Cap is an engineered "T" configuration connector designed to deliver strong, reliable column-to-beam connections where two beams meet in a "T" formation on top of a column. Purpose-built to distribute loads from bisecting beams, this heavy-duty column cap uses Strong-Drive SDS Heavy-Duty Connector screws for faster installation and a lower profile compared to standard through bolts. The CCTQ7.1X-SDS features a 7" beam width (W1) and a 7" main-beam stirrup height (H1), with side-beam stirrup heights (H2 or H3) that can be specified to accommodate a wide range of beam and post size combinations. Constructed from 3-gauge steel and finished in Simpson Strong-Tie gray paint, this column cap is built for demanding structural applications.

Key Features

• Designed for "T" formation two-beam column-to-beam connections, distributing load from bisecting beams
• Strong-Drive SDS Heavy-Duty Connector screws included for faster installation and lower profile than standard through bolts
• Screws are configured to provide high uplift design values
• Certified welds for confidence in strength and loading
• Diamond holes to provide temporary fastening
• 3-gauge steel construction for heavy-duty performance
• Finished in Simpson Strong-Tie gray paint; also available in HDG
• Side-beam stirrup heights (H2 or H3) can vary - specify to suit your application

Specifications

• Model Number: CCTQ7.1X-SDS
• MPN: CCTQ7.1X-SDS
• Brand: Simpson Strong-Tie
• Configuration: T Configuration (two beams on top of column)
• Beam Width W1 (in.): 7
• Main-Beam Stirrup Height H1 (in.): 7
• Side-Beam Stirrup Height (H2 or H3): Specify - can vary in height
• Material: 3 Gauge Steel
• Finish: Simpson Strong-Tie gray paint; also available in HDG
• Fasteners: Strong-Drive SDS Heavy-Duty Connector screws included

Approved Applications

• Column-to-beam connections where two beams meet in a "T" formation on top of a column
• Applications requiring load distribution from bisecting beams to a supporting column
• Structural connections requiring high uplift design values
• Applications where a lower-profile fastening solution is preferred over standard through bolts
• Steel column applications (without column straps - specify "No Straps" for field welding; weld by designer)

What's Included

• Simpson CCTQ7.1X-SDS Column Cap
• 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector screws (install in all round holes)

Installation

Install 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector screws, which are provided, in all round holes.

• Available in widths up to 8" wide.
• Straps may be rotated where W1 != W2.
  
• Many combinations of beam and post sizes can be manufactured Contact us for Configurable Options and Special orders .
• Column caps may be ordered without the column straps for field welding to a steel column, full loads apply for the beam and the post cap. Specify "No Straps" when ordering. Weld

Frequently Asked Questions

What beam configuration is the CCTQ7.1X-SDS designed for?

This column cap is designed specifically for a "T" configuration, meaning it connects a column to two beams where one beam bisects the other on top of the column. It is purpose-built to distribute loads from these bisecting beams in a T-formation arrangement.

What fasteners are used with this column cap, and why are they preferred over through bolts?

The CCTQ7.1X-SDS uses Strong-Drive SDS Heavy-Duty Connector screws, which are included with the connector. These screws allow for faster installation and provide a lower profile compared to standard through bolts, while also being configured to deliver high uplift design values.

What are the key dimensions and material specifications of this column cap?

The CCTQ7.1X-SDS features a 7" beam width (W1) and a 7" main-beam stirrup height (H1). The side-beam stirrup heights (H2 or H3) can vary and should be specified to suit your particular application. The connector is constructed from 3-gauge steel and finished in Simpson Strong-Tie gray paint. It is also available in HDG (hot-dip galvanized) finish.

What is the purpose of the diamond holes on this column cap?

The diamond holes on the CCTQ7.1X-SDS are designed to provide temporary fastening during installation, helping to hold the connector in position while the permanent Strong-Drive SDS screws are driven in. The connector also features certified welds for added confidence in strength and load performance.