The Simpson CCQ96SDS2.5ROT is an 8-3/4 x 6 Column Cap with SDS Screws and Rotated Straps engineered to deliver strong, reliable column-to-beam connections in wood construction. The seat of the column cap provides an additional surface area of bearing that extends beyond each side of the column, helping distribute the load from the beam and provide solid support for the connection. This cap utilizes Strong-Drive SDS Heavy-Duty Connector screws for fast installation and attachment to a greater net section area of the column than a standard bolt attachment normally entails - making it a performance-forward choice for structural framing applications where earthquake or wind loading is a concern.

Key Features

• Rotated Straps (90 deg.): Straps are oriented at 90 degrees, accommodating specific framing configurations that require an alternate strap direction.
• Extended Bearing Seat: The seat extends beyond each side of the column to distribute beam loads across a greater surface area for enhanced connection support.
• Strong-Drive SDS Screws: Provides a lower profile than standard through bolts while engaging a greater net section area of the column.
• Certified Welds: Manufactured with certified welds for confidence in strength and loading performance.
• Increased Uplift Loads: Uplift loads have been increased to address earthquake or wind loading demands.
• Diamond Holes: Diamond-shaped holes allow for temporary fastening during installation.
• 3-Gauge Thickness: Heavy-gauge construction for demanding structural applications.
• Gray Paint Finish: Factory-applied gray paint finish for consistent appearance and basic corrosion resistance.
• Made in the United States: Domestically manufactured for quality assurance.

Specifications

• Model Number: CCQ96SDS2.5ROT
• Strap Orientation: 90 deg. Rotated Straps
• Beam Size: 8-3/4x
• Post Size: 6x
• Thickness (Gauge): 3 gauge
• Finish: Gray Paint
• Country of Origin: United States

Approved Applications

• Wood-to-wood column-to-beam structural connections in post-and-beam framing
• Residential and commercial construction requiring high-load column cap connections
• Applications subject to high uplift forces from seismic (earthquake) loading
• Applications subject to high uplift forces from wind loading
• Framing configurations requiring rotated (90 deg.) strap orientation
• Field installation where fast screw-driven fastening is preferred over through-bolt methods

What's Included

• 1 x CCQ96SDS2.5ROT Column Cap (Rotated Straps)
• 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector screws (provided with the column cap)

Installation Notes

• Install with 1/4" x 2-1/2" Strong-Drive SDS Heavy-Duty Connector screws, which are provided with the column cap.
• Important: Lag screws will not achieve the same load as SDS screws and should not be substituted.
• CCOQ and ECCOQ column cap only (no straps) may be ordered for field-welding to pipe or other columns. Dimensions are the same as CCQ and ECCQ.
• For custom configurations or project-specific requirements, contact us.

Frequently Asked Questions

What makes the rotated straps on the CCQ96SDS2.5ROT different from a standard column cap?

The straps on this column cap are oriented at 90 degrees relative to a standard configuration, making it suitable for specific framing layouts that require an alternate strap direction that a conventional column cap cannot accommodate.

Why are SDS screws used instead of standard through bolts?

Strong-Drive SDS Heavy-Duty Connector screws provide a lower profile than standard through bolts while engaging a greater net section area of the column, which supports stronger attachment and faster installation without the need for pre-drilling large bolt holes.

Is this column cap appropriate for use in areas subject to earthquake or wind loading?

Yes. The CCQ96SDS2.5ROT features increased uplift loads specifically designed to address the demands of earthquake or wind loading, making it a suitable choice for structural framing applications in high-load environments.

What is the purpose of the diamond-shaped holes on this column cap?

The diamond-shaped holes are designed to allow for temporary fastening during installation, helping to hold the cap in place while permanent fasteners are being applied, which can simplify the installation process.