The Simpson H10ASS H10A 18-Gauge Stainless Steel Hurricane Tie by Simpson Strong-Tie is a U-shaped structural connector engineered to hold the rafter or truss on both sides for higher uplift applications. Ideal for exterior and treated-wood environments, this hurricane tie forms part of a continuous load path to resist wind and seismic forces while delivering faster installation than using two single-sided ties.

Key Features

• Forms part of a continuous load path to resist wind and seismic forces
• Holds the rafter or truss on both sides for higher uplift applications
• Embossments add stiffness in crucial areas for improved performance
• U-shaped design provides faster installation than using two single-sided ties
• Optional fastener holes allow connection of roof blocking to the top plate
• Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking
• Stainless steel offers extra corrosion resistance for exterior and treated-wood applications
• Seat width 1-9/16 in.
• Made from 18-gauge steel
• Made in the United States

Specifications

• Model Number: H10ASS
• Material: Stainless Steel
• Finish: Stainless Steel
• Gauge: 18
• Seat Width: 1-9/16 in.
• Country of Origin: United States

Approved Applications

• Rafter-to-top-plate and truss-to-top-plate connections in high uplift applications
• Exterior construction environments requiring enhanced corrosion resistance
• Connections involving treated wood where standard steel may be vulnerable to corrosion
• Roof blocking connections to top plate using optional fastener holes
• Angled blocking installations where field bending up to a maximum pitch of 6:12 is required

Installation Notes

• Install with (18) 0.148 in. x 1-1/2 in. stainless-steel nails
• Use all specified fasteners
• Acceptable fasteners: Nails 0.148" x 1-1/2" or #9 x 1 1/2" Strong-Drive SD Connector screws
• Hurricane ties do not replace solid blocking
• When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind - this can force the truss plate off of the truss and compromise truss performance
• For H10A optional nailing to connect shear blocking, use Nails 0.131 x 2-1/2"
• Slots allow maximum field bending up to a pitch of 6:12; use H10A sloped loads for field-bent installation

Downloads and Resources

• View Specifications

Frequently Asked Questions

Why choose stainless steel over standard steel for this hurricane tie?

The stainless steel construction of the H10ASS offers extra corrosion resistance, making it especially well suited for exterior applications and installations involving treated wood, where standard steel connectors may be prone to accelerated corrosion over time.

Can this hurricane tie accommodate angled or sloped roof installations?

Yes. The H10ASS features slots that allow field bending up to a maximum pitch of 6:12, making it adaptable to angled blocking installations. For field-bent installations, use H10A sloped loads as reference.

Does the H10ASS connect to roof blocking as well as the rafter or truss?

Yes. H10A models come with optional fastener holes specifically designed to connect roof blocking to the top plate, providing added versatility in structural assemblies.

What fasteners are specified for installing the H10ASS?

The H10ASS is installed with (18) 0.148 in. x 1-1/2 in. stainless-steel nails. Alternatively, #9 x 1 1/2" Strong-Drive SD Connector screws may be used. For optional nailing to connect shear blocking, use Nails 0.131 x 2-1/2". Always use all specified fasteners to achieve rated performance.

Related Products

• Nails 0.148" x 1-1/2"
• #9 x 1 1/2"
• Nails 0.131 x 2-1/2"

Note: Product dimensions and/or Screw or Bolt holes may differ from picture.