The Simpson THASR29 Adjustable Truss Hanger, Skewed Right is a U-shaped 16-gauge galvanized steel connector engineered by Simpson to support trusses and beams in angled framing applications. Shipped at a 22-1/2 deg. right skew and field-adjustable from 22-1/2 deg. to 75 deg., this hanger combines height adjustability with on-site skew adjustability, giving installers the flexibility to handle a wide range of angled truss configurations without returning to the supplier for a different part. Its G90 zinc galvanized finish provides corrosion resistance suited to demanding job site conditions, and its single acute side bend line simplifies both planning and installation.

Key Features

• Field-adjustable skew range from 22-1/2 deg. to 75 deg. - accommodates a wide variety of angled truss layouts without requiring factory pre-ordering or custom parts
• Eliminates the need for special orders - one hanger covers a broad skew range, reducing procurement delays and simplifying inventory on the job site
• Replaces the former THASR218 - allows direct substitution on projects or replacements jobs that previously specified the older model
• One acute side bend line - simplifies design planning and speeds up installation by providing a clear, single reference point for skew adjustments
• Joist fasteners required from one side only for skews greater than 22-1/2 deg. - reduces labor and simplifies fastening in tight or constrained framing conditions
• Rated for nails or Simpson Strong-Drive SD Connector screws - gives installers the choice of fastener type to match their preferred method or available tools
• Made from 16-gauge steel with G90 zinc galvanized finish - delivers structural strength and corrosion resistance for long-term performance

Why This Product

• Maximum field flexibility in a single hanger - the ability to adjust the skew from 22-1/2 deg. to 75 deg. on site means one connector handles conditions that would otherwise require multiple specialized parts, keeping projects moving without interruption
• Fastener versatility reduces dependency on a single installation method - acceptance of both standard nails and Simpson Strong-Drive SD Connector screws lets crews work with whatever fastening system is already on hand, without sacrificing rated performance
• Simplified single-side joist fastening at greater angles - for skews beyond 22-1/2 deg., fasteners are required from one side only, making this hanger a practical choice when access to both sides of the joist is limited
• Trusted Simpson engineering for truss and beam support - built to the design standards that structural connectors demand, with a U-shaped profile that pairs height adjustability with skew adjustability for reliable load transfer in angled roof and floor framing

Specifications

• MPN: THASR29
• Brand: Simpson Strong-Tie
• Skew Direction: Right
• Width: 1-5/8 in.
• Height: 9-7/8 in.
• Gauge: 16
• Coating: Zinc Galvanized, G90
• Finish: Zinc Galvanized, G90
• Minimum Carried Member: 2x truss
• Country of Origin: United States
• Install With: (12) 0.148 in. x 3 in. nails in the header and (4-7) 0.148 in. x 1-1/2 in. nails in the joist OR (12) #9 x 2-1/2 in. Strong-Drive SD Connector screws in the header and (4-7) #9 x 1-1/2 in. Strong-Drive SD Connector screws in the joist

Frequently Asked Questions

What skew range can the THASR29 be adjusted to in the field?

The THASR29 is shipped at 22-1/2 deg. right and can be field-skewed from 22-1/2 deg. to 75 deg., providing significant flexibility for installers working with angled truss layouts without requiring factory pre-orders.

Can the THASR29 be installed with screws instead of nails?

Yes. The THASR29 is rated for installation with either nails or Simpson Strong-Tie Strong-Drive SD Connector screws. Acceptable fasteners include (12) 0.148 in. x 3 in. nails or (12) #9 x 2-1/2 in. Strong-Drive SD Connector screws in the header, and (4-7) 0.148 in. x 1-1/2 in. nails or (4-7) #9 x 1-1/2 in. Strong-Drive SD Connector screws in the joist.

Do joist fasteners need to be installed from both sides when using the THASR29 at greater skew angles?

No. For skews greater than 22-1/2 deg., joist fasteners are only required from one side, simplifying installation in tight or angled framing conditions.

What is the material and coating of the THASR29?

The THASR29 is made from 16-gauge steel with a Zinc Galvanized, G90 coating, providing corrosion resistance suitable for structural connector applications.