The Simpson Titen Turbo 3/16 in. x 1-3/4 in. Flat-Head Concrete and Masonry Screw Anchor in White is a carbon steel screw anchor engineered for fast, reliable fastening in concrete, brick, and block. At the heart of its performance is a patented Torque Reduction Channel thread design that keeps driving torque low while delivering superior holding power - so installers get consistently trouble-free results without the extra steps and frustrations that slow down masonry fastening work. The flat-head, 6-lobe profile sits flush after installation, and the white ceramic coating gives finished work a clean, finished appearance suited to dry interior applications.

Key Features

• Torque Reduction Channel between the threads - traps drilling dust where it cannot obstruct thread action, significantly reducing binding, stripping, and snapping during installation so the job gets done right the first time
• Code listed per ICC-ES AC193 / IAPMO UES ER-712 - approved for concrete fastening applications without cleaning dust from predrilled holes, eliminating a time-consuming prep step on every installation
• Serrated screw point - bites into wood immediately for easier starts when fastening wood members to concrete or masonry, reducing the effort needed to begin driving
• No matched-tolerance bit required - works with any standard ANSI drill bit in the correct 5/32 in. diameter, keeping tooling simple and reducing upfront costs
• Zinc-plated with a baked-on ceramic coating in white - provides corrosion resistance and a clean white appearance appropriate for finished interior environments
• Compatible with a cordless drill or impact driver - installs with standard jobsite tools, keeping setup fast and eliminating the need for specialized equipment
• 6-lobe flat-head design with T25 driver bit included - the flat head creates a smooth, flush installed profile while the included bit means you can get to work immediately without hunting for the right driver
• Rated for dry interior environments only - designed specifically for interior masonry and concrete anchoring applications where performance requirements and conditions are well defined

Why This Product

• Skip the hole-cleaning step entirely - the Torque Reduction Channel captures drilling dust so it cannot interfere with installation, and the anchor is code listed to confirm it performs without hole cleaning - a genuine time saver on concrete and masonry fastening jobs
• Fewer installation problems, start to finish - the thread geometry is specifically designed to lower driving torque, reducing the binding, stripping, and snapping that make standard masonry screw anchors frustrating to use, especially in repetitive production installations
• Ready to install with tools you already own - no proprietary bit or matched-tolerance drill is required, just a standard ANSI 5/32 in. drill bit and a cordless drill or impact driver, plus the T25 driver bit included in every pack
• Flush, finished look with reliable holding power - the flat-head profile sits flush against the surface after installation, and the white ceramic coating blends cleanly in interior settings where appearance alongside performance matters

Specifications

• MPN: TNTW18134TF
• Brand: Simpson Strong-Tie
• Diameter: 3/16 in.
• Length: 1-3/4 in.
• Head Type: Flat Head
• Drive Type: T25 6-Lobe
• Material: Carbon Steel
• Coating: Zinc Plated with Ceramic Coating
• Color: White
• Drill Bit Diameter: 5/32 in.
• Installation Tool: Cordless drill or impact driver; standard ANSI drill bit

Approved Applications

• Concrete fastening applications (ICC-ES AC193 / IAPMO UES ER-712 code listed)
• Wood-to-concrete anchoring
• Masonry fastening
• Dry interior environments only

What's Included

Each pack contains (100) Titen Turbo Flat-Head Screws, T25 driver bit.

Frequently Asked Questions

Do I need to clean out the predrilled hole before installing the Titen Turbo screw anchor?

No. The Titen Turbo is code listed in accordance with ICC-ES AC193 for concrete applications without cleaning dust from predrilled holes (IAPMO UES ER-712). The Torque Reduction Channel between the threads captures drilling dust so it cannot obstruct thread action during installation.

What drill bit size is required for installation?

A 5/32 in. diameter standard ANSI drill bit is required. A matched-tolerance bit is not needed - any standard ANSI drill bit of the correct diameter will work.

Can this screw anchor be used outdoors or in wet environments?

No. This anchor is designed for use in dry interior environments only. While it features a zinc-plated, baked-on ceramic coating, it is not rated for outdoor or wet applications.

What tools are needed to drive the Titen Turbo flat-head screw anchor?

The Titen Turbo is designed for installation with a cordless drill or impact driver using a T25 6-lobe driver bit. A T25 driver bit is included in the packaging for flat-head versions.

Note: Product dimensions and/or thread length may differ from picture. Please refer to the specifications listed above for exact measurements.