The Simpson Titen Turbo 1/4 in. x 1-3/4 in. Flat-Head Concrete and Masonry Screw Anchor by Simpson Strong-Tie is engineered for fast, reliable fastening in concrete and masonry applications. At the heart of its performance is a revolutionary thread design featuring a Torque Reduction Channel that gives drilling dust a place to go during installation, dramatically reducing binding, stripping, and snapping for consistently trouble-free results. Whether you are anchoring wood to concrete, securing fixtures to masonry, or tackling general concrete fastening work in dry interior environments, this screw anchor drives directly into a pre-drilled hole without a separate expansion anchor - delivering the holding power and installation confidence professionals depend on.

Key Features

• Torque Reduction Channel between threads - traps drilling dust where it cannot obstruct thread action, so binding, stripping, and snapping are significantly reduced and installation stays trouble-free from start to finish
• Code listed per ICC-ES AC193 / IAPMO UES ER-712 - approved for concrete applications without cleaning dust from pre-drilled holes, saving time and eliminating an extra step on the job
• Serrated screw point - makes starting the fastener easier when anchoring wood, reducing effort and improving accuracy before threads engage the base material
• Compatible with standard ANSI drill bits - no matched-tolerance bit required, so you can use common tools already on hand without sourcing specialty accessories
• Zinc plated with a baked-on ceramic coating - provides a durable protective finish suited for the dry interior environments where this anchor is designed to perform
• Designed for cordless drill or impact driver installation - works with the powered tools already in your kit, keeping setup simple and efficient
• 6-lobe flat-head style with T30 drive - sits flush after installation for a clean, low-profile finished appearance, and the included T30 driver bit means you are ready to work right out of the pack

Why This Product

• Fewer installation failures on the job - the Torque Reduction Channel directly addresses the most common causes of screw anchor failure - binding, stripping, and snapping - giving contractors and installers a concrete fastener they can trust to perform consistently across an entire project
• Skip the hole-cleaning step legally - code listing under ICC-ES AC193 specifically covers installation without cleaning dust from pre-drilled holes, a meaningful time saver on busy job sites where that step is easy to overlook
• No specialty tooling required - because a standard ANSI drill bit handles pre-drilling and a T30 driver bit is included in the pack, there is nothing extra to source before you can get to work
• A flat-head profile that disappears into the finished surface - the flush-sitting flat-head design keeps fasteners discreet and surface-ready, making this anchor a practical choice wherever a clean installed appearance matters

Specifications

• MPN: TNT25134TF
• Brand: Simpson Strong-Tie
• Diameter: 1/4 in.
• Length: 1-3/4 in.
• Head Type: Flat Head
• Drive Type: T30 6-Lobe
• Material: Carbon Steel
• Coating: Zinc Plated with Ceramic Coating
• Color: Blue
• Installation Tool: Installs with Standard ANSI drill bit

Approved Applications

• Concrete fastening applications (code listed per ICC-ES AC193 / IAPMO UES ER-712)
• Masonry fastening applications
• Wood-to-concrete anchoring
• Dry interior environments only

What's Included

Each pack contains (100) Titen Turbo Flat-Head Screws, T30 driver bit.

Frequently Asked Questions

Do I need a special matched-tolerance drill bit to install the Titen Turbo screw anchor?

No. A matched-tolerance bit is not required. You can install the Titen Turbo using a standard ANSI drill bit, making setup straightforward with common tools.

What is the Torque Reduction Channel and why does it matter?

The Torque Reduction Channel is a revolutionary feature built into the thread design that gives drilling dust a place to go during installation. By trapping dust where it cannot obstruct thread action, it significantly reduces torque-related issues like binding, stripping, and snapping, resulting in consistently trouble-free installation.

Can this screw anchor be installed without first cleaning dust from the predrilled hole?

Yes. The Titen Turbo is code listed in accordance with ICC-ES AC193 for concrete applications without cleaning dust from predrilled holes (IAPMO UES ER-712), saving time on the job.

Is the Titen Turbo suitable for outdoor or wet environments?

No. This screw anchor is intended for use in dry interior environments only. Its zinc plated with baked-on ceramic coating provides protection suited specifically for dry interior conditions.

Note: Product dimensions and/or thread length may differ from picture. Please see the item description above for specifications.