The Simpson SS2.5 Stud Shoe from Simpson is engineered to reinforce vertical wall studs that have been drilled or notched during construction - most commonly to route a plumbing waste line through framing. Sized for a nominal 3x stud, this connector installs directly over the outside diameter of the pipe, restoring structural integrity to a compromised stud and serving as part of a total member replacement in load-bearing applications. Built from 16-gauge steel with a G90 zinc galvanized finish, the SS2.5 is a reliable solution for plumbers, framers, and contractors working on residential or commercial wall assemblies.

Key Features

• Installs over pipe up to 2-3/8 in. outside diameter - accommodates standard plumbing waste line pipe sizes without requiring stud replacement before fitting the connector
• Code listed for both building and plumbing codes - gives inspectors and contractors the confidence of documented compliance across two separate code categories
• Reinforces studs which have been drilled or notched during construction - restores carrying capacity to framing members that have been weakened by pipe penetrations
• Designed to resist tension loads only - clearly defined load direction means correct structural application every time, reducing the risk of misuse in the field
• Sized for nominal 3x stud - ensures a proper fit against the stud face so the shoe seats correctly and fasteners land where intended
• Made from 16-gauge steel - provides the rigidity and strength needed for a structural connector in wall framing applications
• Galvanized G90 finish - zinc coating guards against corrosion in environments where moisture from plumbing lines may be present over time

Why This Product

• A code-compliant fix for a common framing problem - when plumbers drill through studs for waste lines, the SS2.5 provides a code-listed solution recognized under both building and plumbing codes, simplifying the inspection process
• Designed specifically for pipe-penetrated studs - unlike generic hardware, this stud shoe is purpose-built to install over the pipe itself, making it practical to use after the pipe is already in place
• Corrosion-resistant construction for wet environments - the G90 zinc galvanized finish is suited for the moisture-prone conditions typical of wall cavities where plumbing runs through framing
• Backed by Simpson engineering for structural applications - rated as part of a total member replacement in structural contexts, this connector meets the demanding requirements of load-bearing wall stud repair

Specifications

• Model Number: SS2.5
• Member Size: 3x
• Gauge: 16
• Width: 2-9/16 in.
• Coating/Finish: Zinc Galvanized, G90
• Install With: (12) 0.148 in. x 1-1/2 in. nails
• Country of Origin: United States

Frequently Asked Questions

What size stud is the SS2.5 designed for?

The SS2.5 is sized for a nominal 3x stud, with a width of 2-9/16 in.

What is the maximum pipe diameter this stud shoe can accommodate?

The SS2.5 installs over pipe up to 2-3/8 in. outside diameter, making it suitable for wall studs drilled to accommodate standard plumbing waste lines.

Is the SS2.5 code listed?

Yes, the SS2.5 is code listed for both building and plumbing codes.

What type of loads is the SS2.5 designed to resist?

The SS2.5 is designed to resist tension loads only and is used as part of a total member replacement in structural applications where a stud has been drilled or notched.

Note: Product dimensions and/or screw or bolt holes may differ from picture. Please see item description for specifications.