The Simpson SP6 Stud Plate Tie is a U-shaped galvanized steel connector from Simpson engineered to secure a wood stud to top plates or sill plates and resist uplift in wood-framed wall assemblies. Its horizontal portion bears firmly against the plate while two vertical legs nail directly to the edges of the stud, creating a load-rated stud-to-plate connection built to stand up to wind and seismic forces. Sized for a nominal 2x stud and a nominal 6x plate, this tie is a cost-effective uplift solution when installed before wall placement.

Key Features

• Load rated - gives builders and inspectors confidence that the connection meets documented structural performance requirements.
• Designed to resist wind and seismic forces - provides critical uplift resistance in wall assemblies located in high-wind or earthquake-prone regions.
• Does not require top or bottom track attachment - simplifies installation and reduces the number of additional components needed to complete a secure connection.
• U-shaped profile with horizontal bearing portion and two vertical nailing legs - distributes load evenly across the plate and stud edges for a strong, positive mechanical connection.
• 20-gauge steel construction - delivers a balance of structural strength and ease of handling without adding unnecessary weight to the assembly.
• Zinc Galvanized, G90 finish - provides an added layer of corrosion resistance to help maintain connection integrity over the life of the structure.
• Install-before-placement design - positioning the tie prior to wall erection ensures correct bearing and nailing geometry for a fully load-rated result.

Why This Product

• Purpose-built uplift resistance - the SP6 is specifically designed as a stud-to-plate connection to resist uplift, making it a direct, code-conscious choice for wood-framed walls that must meet wind and seismic design requirements.
• Straightforward installation with minimal hardware - the tie requires no top or bottom track attachment and installs with six standard nails, keeping labor time and fastener counts low on the job site.
• G90 galvanized protection on a trusted connector - the Zinc Galvanized, G90 coating pairs with Simpson's load-rated engineering to deliver a connector that holds up in demanding environments without sacrificing structural accountability.
• Correct fit for 2x stud and 6x plate framing - sized precisely for nominal 2x studs and 6x plates, the SP6 eliminates guesswork and ensures a proper fit within standard wood wall framing configurations.

Specifications

• Model Number: SP6
• Width: 5-9/16 in.
• Length: 7-3/4 in.
• Gauge: 20
• Coating/Finish: Zinc Galvanized, G90
• Member Size: 2x stud; 6x plate
• Install With: (6) 0.148 in. x 1-1/2 in. nails (sold separately)
• Country of Origin: United States

Frequently Asked Questions

What is the SP6 Stud Plate Tie designed to do?

The SP6 is designed as a stud-to-plate connection to resist uplift. Its U-shaped design allows the horizontal portion to bear against wood-wall top plates or sill plates while the two vertical legs are nailed to the edges of a wood stud, creating a secure connection that resists wind and seismic forces.

What fasteners are required to install the SP6?

Installation requires (6) 0.148 in. x 1-1/2 in. nails. The SP6 does not require top or bottom track attachment, simplifying the installation process.

What size stud and plate is the SP6 compatible with?

The SP6 is sized for a nominal 2x stud and a nominal 6x plate, making it appropriate for standard 6x plate wood-framed wall construction where a stud-to-plate uplift connection is required.

When should the SP6 Stud Plate Tie be installed?

The SP6 is a cost-effective option when properly installed before the placement of the wall. Installing the tie prior to wall placement ensures correct positioning of the horizontal bearing portion and vertical nailing legs for a fully load-rated connection.