The Simpson LRU212Z LRUZ ZMAX Galvanized Slopeable Light Rafter U Hanger is an economical, field-adjustable connector engineered by Simpson for rafter-to-ridge connections using solid sawn lumber. Its field-adjustable seat handles a wide range of roof pitches without requiring special orders, letting crews eliminate mismatched angles on the job and keep work moving. The LRUZ delivers comparable or better load capacity than other rafter hangers while using fewer fasteners - all at a reduced cost, making it a practical choice for both new roof framing and retrofit projects.

Key Features

• Open design with field-adjustable slope - the hanger can be installed either before or after the rafter is in place, saving time on new construction and retrofit jobs alike
• Accommodates roof pitches from 0:12 to 14:12 - covers the full range of common and steep residential roof slopes without special-order hardware
• Slopes up or down to 45 deg. (12:12) - for slopes greater than 45 deg. up to 49 deg. (14:12), allowable loads are 0.85 of table loads, giving contractors clear guidance for steep-pitch installations
• Fasteners placed high on the face of the hanger - allows the bottom of the rafter to hang below the ridge beam for added framing versatility
• Fits rafter sizes 2x10 and 2x12 - one hanger model covers two common rafter dimensions, reducing the number of SKUs a crew needs to stock on site
• Made from 18-gauge steel - provides structural strength while keeping the hanger lightweight and easy to handle during installation
• ZMAX galvanization - offers extra corrosion resistance for exterior applications and use with treated wood, where standard galvanized connectors are more vulnerable to deterioration

Why This Product

• Field-adjustable design cuts job-site delays - the adjustable seat lets installers dial in the correct slope angle on the spot across pitches from 0:12 to 14:12, eliminating the wait and guesswork associated with angle-specific hangers
• Retrofit-friendly open design - because the hanger can be positioned before or after the rafter is set, it works just as well for repairing or reinforcing existing roof structures as it does for new framing
• Comparable or better load capacity at a lower cost - the LRUZ achieves strong performance using fewer fasteners than many competing rafter hangers, helping keep both material and labor costs down
• ZMAX coating for demanding environments - the extra layer of corrosion protection makes this hanger a reliable long-term choice wherever treated lumber or outdoor exposure is part of the application

Specifications

• MPN: LRU212Z
• Member Size: 2x10, 2x12
• Gauge: 18
• Seat Width: 1-9/16 in.
• Coating/Finish: ZMAX
• Install With: 0.148 in. x 3 in. nails, 0.162 in. x 3-1/2 in. nails or #10 x 1-1/2 in. or 2-1/2 in. Strong-Drive SD screws (sold separately)
• Height: 10-11/16 in.
• Width: 1-9/16 in.
• Country of Origin: United States

Frequently Asked Questions

What roof pitch range does the LRU212Z accommodate?

The LRU212Z accommodates roof pitches from 0:12 to 14:12. It slopes up or down to 45 deg. (12:12). For slopes greater than 45 deg. up to 49 deg. (14:12), allowable loads are 0.85 of table loads.

Can the LRU212Z be installed after the rafter is already in place?

Yes. The LRUZ's unique open design enables the hanger to be installed either before or after the rafter is in place, making it well suited for both new construction and retrofit applications.

What fasteners should be used to install the LRU212Z?

Install with 0.148 in. x 3 in. nails, 0.162 in. x 3-1/2 in. nails, or #10 x 1-1/2 in. or 2-1/2 in. Strong-Drive SD screws.

Why is ZMAX galvanization important for this hanger?

ZMAX galvanization offers extra corrosion resistance, making the LRU212Z suitable for exterior applications and use with treated wood where standard galvanized connectors may be prone to accelerated corrosion.