The Simpson Strong-Tie HU Heavy Face-Mount Joist Hanger is an engineered structural connector designed for framing connections that demand additional strength and elevated safety factors beyond the capacity of standard hangers. Built as a heavy-duty, face-mount hanger, select models can be configured with a skewable seat and a sloping seat capable of angling up to 45 deg., making this connector a capable solution for complex framing geometries where conventional hangers are not sufficient.

Key Features

• Heavy-duty face-mount design - engineered specifically for connections requiring additional strength and elevated safety factors, providing greater structural reliability in demanding load conditions
• Skewable seat on select models - allows the hanger to accommodate angled joist installations, reducing the need for custom fabrication on complex framing layouts
• Seat slope up to 45 deg. on applicable models - supports sloped joist configurations that standard hangers cannot handle, expanding the range of roof and floor framing applications this connector can serve
• Manufactured by Simpson Strong-Tie to standardized hanger testing requirements - gives designers and builders documented performance data to rely on when specifying connections
• Material gauge may vary from that specified - allows manufacturing flexibility while maintaining the structural performance required for each approved application

Why This Product

• Built for high-demand structural connections - this hanger is engineered for applications where standard face-mount hangers fall short, targeting structures that require additional strength and elevated safety factors
• Versatile geometry for complex framing - the combination of a skewable seat and a seat that slopes up to 45 deg. on select models means a single connector family can address a wide range of sloped and skewed joist configurations
• Tested to a standardized hanger test method - performance is backed by documented testing conducted by Simpson Strong-Tie, giving qualified designers a reliable basis for evaluating each connection
• Configurable to meet specific project requirements - the ability to specify seat slope and skew options makes this heavy face-mount hanger a practical choice when off-the-shelf connectors cannot meet the demands of the installation

Specifications

• Manufacturer Part Number (MPN): HU CUSTOM MADE
• Brand: Simpson Strong-Tie
• Type: Heavy Face-Mount Joist Hanger
• Mount Style: Face-Mount
• Maximum Seat Slope: Up to 45 deg.
• Material Gauge: May vary from that specified

Approved Applications

• Structures requiring additional strength and elevated safety factors beyond standard hanger capacity
• Framing connections involving sloped or skewed joist configurations up to 45 deg.
• Installations where face-mount connectivity is required between joists and header members

Important Technical Notes

The following information applies only to hangers manufactured by Simpson Strong-Tie and installed per Simpson Strong-Tie instructions. Some combinations of hanger options on a single hanger have not been evaluated. In some cases, combinations of options cannot be manufactured. A qualified designer must always evaluate each connection, including header and joist limitations, before specifying the product.

Testing is performed using a standardized hanger test method. The joist in the test setup may include the minimum amount of structural stability where appropriate. For example, the sloped down hanger tests are assembled with a joist cut on the lower end to lie flush with a wood member attached with three 8d common toenails. Header and other attached structural members are assumed fixed in actual installations. Horizontal loads induced by sloped joists must be resisted by other members in the structural system.

Custom Order

This product is a custom-configured part. To discuss your specific requirements, Contact us.

Note: Product dimensions and/or Screw or Bolt holes may differ from picture. Product dimensions and/or Screw or Bolt holes may differ from picture. Dimensions and/or Screw or Bolt holes may differ from picture.

Frequently Asked Questions

What makes the HU Heavy Face-Mount Joist Hanger different from a standard joist hanger?

The HU series is a heavy-duty face-mount hanger engineered specifically for connections requiring additional strength and elevated safety factors beyond what standard hangers are designed to provide. It is intended for applications where a typical hanger's capacity is insufficient.

Can this hanger accommodate sloped or skewed framing configurations?

Yes, on select models the seat is skewable and can also slope up to 45 deg., making the HU hanger suitable for complex framing geometries where joists are installed at an angle rather than level and square.

Will the material gauge always match what is specified?

Not necessarily. The gauge of the hanger may vary from that specified. If gauge is a critical factor for your application, verify the exact gauge of the unit you receive before installation.

Are there any installation requirements specific to this hanger?

Yes. The load and performance information for this hanger applies only when it is manufactured by Simpson Strong-Tie and installed strictly per Simpson Strong-Tie instructions. Deviating from the manufacturer's installation guidelines may affect the connector's rated performance and safety.