The Simpson Heavy Face-Mount Truss Hanger for 2x8 by Simpson is an engineered structural connector built to deliver strong, reliable connections for 2x8 joists, rafters, and beams in truss framing applications. Its nail patterns are designed specifically for shallow heel heights, with full allowable loads applying at heel heights as low as 3-7/8 in. with minimum nailing - a critical advantage in truss assemblies where heel height is limited. Minimum and maximum nailing options give installers flexibility across varying heel heights and end conditions, making this hanger a dependable choice for both standard and demanding truss installations.

Key Features

• Nail patterns engineered for shallow heel heights - full allowable loads with minimum nailing apply to heel heights as low as 3-7/8 in., so structural performance is not compromised in low-heel truss applications
• Dual installation options - round holes only, or round and triangle holes combined - gives installers the flexibility to meet minimum load requirements with fewer fasteners or achieve maximum load values when project conditions demand it
• Minimum and maximum nailing configurations supported - accommodates varying heel heights and end conditions without requiring a different hanger, reducing the number of connector types needed on a job
• 16-gauge steel construction - heavy-gauge material provides the structural strength and rigidity expected in demanding face-mount truss hanger applications
• Zinc Galvanized, G90 finish - the G90 coating delivers enhanced corrosion resistance, making this hanger suitable for use in environments where moisture exposure is a concern
• Can be skewed up to 67-1/2 deg. - built-in versatility to handle angled framing conditions without requiring special-order hardware for many common skewed truss configurations

Why This Product

• Engineered specifically for shallow-heel truss framing - unlike general-purpose joist hangers, this connector's nail pattern is purpose-built for low heel heights, delivering full allowable loads at heel heights as low as 3-7/8 in. so builders don't have to over-engineer their fastening approach to compensate
• Load flexibility through nailing options - the ability to install with round holes only or with both round and triangle holes means a single hanger model can serve a range of load requirements, reducing material waste and simplifying procurement
• G90 galvanized protection for long-term durability - the Zinc Galvanized, G90 finish provides a higher level of corrosion resistance than standard galvanized coatings, helping the connection maintain its integrity over the life of the structure
• Trusted Simpson engineering for code-compliant truss connections - Simpson's HTU series is part of a broad line of engineered hangers with documented load values, giving contractors and inspectors confidence that the connection is performing as specified

Specifications

• Model Number: HTU28
• Brand: Simpson Strong-Tie
• Member Size: 2x8
• Gauge: 16
• Coating/Finish: Zinc Galvanized, G90
• Install With: 16d common nails and 10d x 1-1/2 in. nails, #9 x 1-1/2 in. Strong-Drive SD Connector screws (sold separately)
• Width: 1-5/8 in.
• Height: 7-1/16 in.
• Seat Depth: 3-9/16 in.
• Country of Origin: United States

Options

• HTU may be skewed up to 67-1/2 deg.. Contact us for Configurable Options and Special orders

Installation:

• Install with 16d common nails and 10d x 1-1/2 in. nails, or #9 x 1-1/2 in. Strong-Drive SD Connector screws
  
• Can be installed filling round holes only, or filling round and triangle holes for maximum values
• See alternate installations in Specifications

Frequently Asked Questions

What is the minimum heel height that the HTU28 supports with full allowable loads?

The HTU28 is engineered with nail patterns specifically designed for shallow heel heights. Full allowable loads with minimum nailing apply to heel heights as low as 3-7/8 in., making it well-suited for truss applications with limited heel height.

What fasteners are required to install the HTU28?

The HTU28 should be installed with 16d common nails and 10d x 1-1/2 in. nails, or #9 x 1-1/2 in. Strong-Drive SD Connector screws. It can be installed filling round holes only, or filling both round and triangle holes to achieve maximum load values.

What gauge steel is the HTU28 made from, and what corrosion protection does it offer?

The HTU28 is manufactured from 16-gauge steel and features a G90 zinc galvanized coating, which provides extra corrosion resistance for demanding construction environments.

Can the HTU28 be used in applications where there is a gap between the truss and the carrying member?

Yes. The HTU28 provides alternate allowable loads for gaps between the end of the truss and the carrying member of up to 1/2 in. maximum, allowing for greater construction tolerances. Note that the maximum gap for standard allowable loads is 1/8 in. per ASTM D7147.

Note: Product dimensions and/or screw or nail holes may differ from picture. Please see item description for specifications.