The Simpson H14 Hurricane Tie is an 18-gauge G90 galvanized steel connector designed to positively connect trusses and rafters to the top of wall framing, providing critical resistance to high winds and seismic forces. Built by Simpson Strong-Tie, this rafter tie works with both solid-sawn and engineered lumber, making it a reliable choice for wood-framed construction in demanding structural and high-wind applications. It also performs well when connecting 2x deck joists on top of a perpendicular beam, expanding its usefulness beyond roof framing alone.

Key Features

• 18-gauge steel construction - delivers the structural rigidity needed to maintain a secure rafter-to-wall connection under uplift and lateral loading.
• G90 zinc galvanized coating - provides extra corrosion resistance, keeping the connector reliable in exterior conditions and applications involving treated wood.
• Designed for paired installation on either side of the rafter, truss, or joist - installing in pairs maximizes resistance to both uplift and lateral forces simultaneously for a stronger overall connection.
• Compatible with 2x deck joists on top of a perpendicular beam - gives builders a single connector that addresses both roof framing and deck construction needs.
• Compatible with 8d common or 8d x 1-1/2 in. nails - works with widely available fastener types, simplifying procurement and keeping installation straightforward on the jobsite.

Why This Product

• Engineered for high-wind and seismic conditions - the H14 is specifically designed to positively connect trusses and rafters to wall framing, directly addressing the uplift and lateral forces that pose the greatest risk in storm-prone and seismically active regions.
• Versatile across rafter, truss, joist, and deck applications - a single connector handles multiple framing scenarios, from roof construction to connecting 2x deck joists over a perpendicular beam, reducing the number of different products a builder needs on hand.
• G90 galvanized coating for long-term performance in tough environments - the extra corrosion resistance built into the finish makes this tie well suited for exterior applications and use with treated lumber where a standard coating would fall short.
• Made in the United States by a trusted structural connector brand - the H14 is a Simpson Strong-Tie product, a name recognized by builders and inspectors across a wide range of residential and commercial wood construction projects.

Specifications

• Model Number: H14
• Gauge: 18
• Coating: Zinc Galvanized, G90
• Finish: Zinc Galvanized, G90
• Install With: Install with 8d common or 8d x 1-1/2 in. nails
• Fasteners Required - To Rafters/Truss: (12) Nails 0.131 x 1-1/2"
• Fasteners Required - Top Plates: (15) Nails 0.131 x 2-1/2"
• Country of Origin: United States

Approved Applications

• Connecting trusses and rafters to the top of wall framing to resist high winds and seismic forces
• Connecting 2x deck joists on top of a perpendicular beam
• Exterior and treated-wood applications requiring additional corrosion resistance
• High-wind and coastal construction where positive rafter-to-wall connections are required

Downloads and Resources

• View Specifications

Frequently Asked Questions

How should the H14 hurricane tie be installed for maximum effectiveness?

The H14 should be installed in pairs on either side of the rafter, truss, or joist. This paired installation provides resistance to both uplift and lateral forces simultaneously. The pre-bent flange is designed to attach underneath the double top plate, though it can be straightened for installation on a header.

What fasteners are required to install the H14?

Installation requires (12) Nails 0.131 x 1-1/2" into the rafter or truss, and (15) Nails 0.131 x 2-1/2" into the top plates. The H14 is also compatible with 8d common or 8d x 1-1/2 in. nails.

Why is the H14 coated with G90 galvanization?

The G90 zinc galvanized coating provides extra corrosion resistance, making the H14 suitable for exterior applications and use with treated wood where standard coatings may not provide adequate protection against moisture and chemical exposure.

Can the H14 be used with engineered lumber as well as solid-sawn lumber?

Yes. The H14 is designed to connect both solid-sawn and engineered lumber, making it versatile across a wide range of wood construction applications including trusses, rafters, and deck joists.

Related Products

• Nails 0.131 x 1-1/2"
• Nails 0.131 x 2-1/2"

Note: Hurricane ties do not replace solid blocking. When installing ties on plated trusses on the side opposite the truss plate, do not fasten through the truss plate from behind, as this can force the truss plate off of the truss and compromise truss performance.