Product Description
The Simpson DGHT Top-Flange Fire Wall Hanger is a patent-pending, load-tested hanger engineered specifically for multifamily and multilevel Type III residential construction where fire-rated wall assemblies are required. Carrying a two-hour fire-resistant rating tested in accordance with ASTM E814, this hanger is the first fire wall hanger designed to install with a power nailer - accelerating installation before drywall goes up and helping keep construction schedules on track. Its innovative top-flange configuration accommodates two layers of 5/8 in. gypsum board that can be slipped into place after framing is complete, and its fire-rated performance has been verified for use on both sides of the wall.
Key Features
- Power nailer compatible and loads tested for 1 1/2 in. and 2 1/2 in. nails - lets crews use a power nailer or install by hand, so the hanger fits the fastening method already on the job site without slowing the framing phase.
- Two-hour fire-resistant rating (Intertek Design No. SST/WPCF 120-01) tested to ASTM E814 - provides the certified, code-backed fire-wall performance required for multifamily and Type III residential assemblies, on both sides of the wall.
- Two-hour fire rating applies to 2x4 or thicker walls - gives designers and inspectors confidence that the rating holds across the common wall thicknesses used in multilevel residential framing.
- Innovative top-flange design sized for back-to-back installation on 2x6 (minimum) walls - simplifies hanger placement at shared fire-wall assemblies without the need for custom or specialty framing.
- Built-in clearance for two layers of 5/8 in. drywall after framing - drywall is slipped in after the structural framing is complete, keeping trades from working around each other and reducing rework risk.
- Made from 10-gauge steel with a G90 zinc galvanized finish - the heavy-gauge steel delivers the structural capacity required for load-tested fire wall applications, while the galvanized coating resists corrosion over the life of the assembly.
Why This Product
- The first fire wall hanger built for power nailer installation - no other fire wall hanger was specifically designed to accept a power nailer, which means faster installation before drywall and fewer scheduling delays on multifamily projects.
- A single hanger delivers verified two-hour fire-rated performance on both sides of the wall - the ASTM E814-tested, Intertek-certified rating removes guesswork for inspectors and satisfies fire-wall requirements in one confirmed product rather than an unrated workaround.
- Designed from the ground up for the framing sequence that crews actually use - the top-flange configuration lets drywall slide in after framing is complete, so structural and drywall trades are not forced to work simultaneously or redo finished work.
- Backed by Simpson engineering and domestic production - consistent quality from a trusted connector brand reduces the risk of field fit issues, rejected inspections, or hanger substitutions that delay project closeout.
Specifications
- MPN: DGHT2.56/24
- Brand: Simpson Strong-Tie
- Member Size: 2-1/2 in. x 24 in.
- Seat Width: 2-9/16 in.
- Height: 23-15/16 in.
- Gauge: 10
- Coating/Finish: Zinc Galvanized, G90
- Fire Rating: Two-hour
- Fire Rating Standard: ASTM E814
- Fire Rating Certification: Intertek Design No. SST/WPCF 120-01
- Installation Fasteners: Install with (6) 0.148 in. x 1-1/2 in. OR 0.148 in. x 2-1/2 in. nails in the top; (2) 0.148 in. x 1-1/2 in. nails OR (4) 0.148 in. x 2-1/2 in. nails in the face; and (6) 0.148 in. x 1-1/2 in. nails in the joist (sold separately)
- Country of Origin: United States
Approved Applications
- Multifamily residential construction
- Multilevel Type III residential construction
- Fire wall assemblies requiring a two-hour fire-resistant rating
- Back-to-back hanger installations on 2x6 (minimum) walls
- Applications requiring fire-rated performance on both sides of the wall
Options
- Contact us for Configurable Options and Special orders
Downloads and Resources
- Two-hour Fire-Resistant rating Intertek Design No. SST/WPCF 120-01
- Specifications
Note: Product dimensions may differ from picture.
Frequently Asked Questions
What fire rating does the Simpson DGHT2.56/24 carry?
The DGHT2.56/24 carries a two-hour fire-resistant rating. It has been tested in accordance with ASTM E814 and is certified under Intertek Design No. SST/WPCF 120-01. The two-hour fire rating applies to 2x4 or thicker walls and is valid for use on both sides of the wall.
Can this hanger be installed with a power nailer?
Yes. The Simpson DGHT is the first fire wall hanger specifically designed for installation with a power nailer. It is also loads tested and code listed for hand-installed nails. Both 1-1/2 in. and 2-1/2 in. nails (0.148 in. diameter) are approved for use.
How does the top-flange design accommodate drywall installation?
The top-flange design of the DGHT2.56/24 provides space for two layers of 5/8-in. gypsum board (drywall) to be slipped into place after the framing is complete. This allows the hanger to be fully installed before drywall, streamlining the construction sequence and saving time on the job site.
What is the minimum wall thickness required for back-to-back installation?
The innovative top-flange design of the DGHT supports back-to-back installation on walls that are 2x6 or thicker (minimum). The two-hour fire rating applies to 2x4 or thicker walls in standard single-side applications.
Reviews
FAQs
Standard Shipping is free on most orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.