The Simpson CC68 Column Cap for 6x Beam and 8x Post by Simpson Strong-Tie is engineered to deliver strong, reliable column-to-beam connections in wood construction. The seat of the column cap provides an additional surface area of bearing that extends beyond each side of the column, helping to distribute the load from the beam and provide dependable support for the connection - making it a trusted solution for structural applications subject to demanding loads, including those in earthquake or high-wind regions.

Key Features

• Certified welds - provide confidence in strength and loading, giving builders and inspectors assurance in the structural integrity of every connection
• Increased uplift load capacity - engineered for earthquake or wind loading, making this column cap appropriate for high-wind and seismic applications where uplift resistance is critical
• Bolt spacing meets NDS code requirements - ensures optimal performance and simplifies the approval process on code-compliant projects
• Diamond holes for temporary fastening - allow the cap to be positioned and held in place during installation before final bolting, improving accuracy and efficiency on the job
• Nominal 6x beam width and 8x post size - purpose-matched dimensions ensure a proper fit for this specific beam-and-post combination without guesswork or field modification
• 7-gauge steel construction - delivers the thickness and rigidity needed for heavy structural column cap applications
• Simpson Strong-Tie gray paint finish - provides a consistent, professional appearance and a baseline level of surface protection for the connector

Why This Product

• Built for high-load structural connections - the extended bearing seat distributes beam loads across a greater surface area, reducing concentrated stress at the column-to-beam joint and supporting dependable performance in demanding wood construction applications
• Engineered for code-sensitive and hazard-prone environments - with uplift loads increased for earthquake or wind loading and bolt spacing designed to meet NDS code requirements, this column cap is a practical choice for projects in seismic or high-wind zones where compliance and load capacity both matter
• Installer-friendly design reduces field time - diamond holes allow for temporary fastening to hold the cap in position before final installation with the six 5/8-in. diameter bolts, streamlining the connection process and minimizing alignment errors
• Backed by Simpson Strong-Tie engineering standards - certified welds and a domestic manufacturing origin reflect the quality controls that contractors and structural engineers rely on when specifying post and beam connectors for critical load paths

Specifications

• Model Number: CC68
• Member Size: 6x Beam, 8x Post
• Beam Width: 5-1/4 in. or 5-1/2 in.
• Width 1: 5-1/2 in.
• Width 2: 7-1/2 in.
• Length 1: 11 in.
• Height 1: 6-1/2 in.
• Gauge: 7
• Coating/Finish: Simpson Strong-Tie Gray Paint
• Install With: Install with (6) 5/8-in. diameter bolts (sold separately)
• Post Size: 6x8
• Country of Origin: United States

Options

• Contact us for Configurable Options and Special orders
• Straps may be rotated 90 deg.
• For special, custom, or rough-cut lumber sizes, provide dimensions. An optional W2 dimension may be specified. (The W2 dimension on straps rotated 90 deg. is limited by the W1 dimension.)

Downloads and Resources

• Straps may be rotated 90 (See Spec Sheet) and for CC5 1/4-6.

Frequently Asked Questions

What size beam and post is the CC68 designed for?

The CC68 is designed for a nominal 6x beam width and a nominal 8x post size, making it the correct column cap selection for that specific beam-to-post combination in wood construction.

How is the CC68 installed and what fasteners are required?

The CC68 is installed using (6) 5/8-in. diameter bolts. The bolt spacing is designed to meet NDS code requirements to ensure optimal performance. Diamond holes are also included to allow for temporary fastening during installation.

What makes the CC68 suitable for high-wind or seismic applications?

The CC68 features uplift loads that are increased for earthquake or wind loading, along with certified welds that provide confidence in strength and load capacity. These characteristics make it well suited for use in areas subject to elevated lateral or uplift forces.

What material and finish is the CC68 made from?

The CC68 is constructed from 7-gauge steel and features a Simpson Strong-Tie gray paint finish, providing a durable and consistent protective coating for structural use.

Note: Product dimensions and/or Screw/Bolt holes may differ from picture.