The Simpson CC44ROT 4x Beam 4x Post Rotated Straps Column Cap is a purpose-built post-to-beam connector from Simpson designed for structural wood framing applications requiring a reliable, code-compliant column cap connection. Engineered specifically for 4x4 post framing systems with a 3 1/2 in. beam width, this column cap features a rotated strap configuration that accommodates framing scenarios where beam and post widths differ - giving contractors and builders a versatile solution for standard, custom, and rough-cut lumber installations. The extended seat design distributes load from the beam across an area that reaches beyond each side of the column, providing a broader bearing surface and superior support at the connection point.

Key Features

• Rotated Strap Design - Allows straps to be repositioned in configurations where W1 and W2 dimensions are not equal, making the connector adaptable for special, custom, or rough-cut lumber where a standard cap would not fit properly.
• Extended Seat Bearing Surface - The seat projects beyond each side of the column, distributing beam loads over a wider area and reducing point stress at the connection for stronger, more stable support.
• 4x4 Post and 3 1/2 in. Beam Compatibility - Sized precisely for standard dimensional lumber used in residential and commercial structural framing, ensuring a proper fit without field modification.
• Simpson Gray Paint Finish - Provides a consistent, clean appearance suited to exposed structural framing while offering a baseline level of surface protection during construction.
• Domestic Manufacturing - Produced in the United States under Simpson quality standards, supporting consistent production tolerances for structural connectors used in load-bearing applications.
• Seismic and High-Wind Load Suitability - Engineered to meet the demands of construction in regions requiring increased uplift resistance, making it appropriate for code-compliant builds in challenging environmental conditions.

Why This Product

• Built for Dimensional Accuracy - With precise sizing for 4x4 posts and 3 1/2 in. beam widths, this column cap integrates cleanly into standard wood post-to-beam connections without requiring modifications, saving time and reducing installation error on the job site.
• Adaptable Where Standard Connectors Fall Short - The rotated strap configuration addresses real-world framing conditions - including custom and rough-cut lumber - where W1 and W2 dimensions do not match, giving builders a code-compliant path forward without sourcing specialty hardware.
• Engineered for Structural Confidence - Approved for seismic and high-wind load applications, this column cap is a dependable choice for residential and commercial projects where uplift resistance and load distribution at the column-beam junction are critical design requirements.
• Simpson Quality from a Trusted Source - Manufactured in the United States by Simpson, a recognized name in structural connectors, this column cap reflects the engineering rigor and material consistency that structural framing projects demand.

Specifications

• Model Number: CC44ROT
• Manufacturer: Simpson Strong-Tie
• Finish: Simpson Strong-Tie Gray Paint
• Post Size: 4x4
• Beam Width: 31/2 in.
• Width 1: 3-5/8 in.
• Width 2: 3-5/8 in.
• W1 Dimension: 3" in.
• W2 Dimension: 3" in.
• Length (L): 7 in.
• Height (H1): 4 in.
• Bolt Size: 5/8 in.
• Country of Origin: United States

Approved Applications

• Wood post-to-beam column connections in residential and commercial construction
• Structural framing applications requiring code-compliant column cap connections
• 4x4 post framing systems with 31/2-inch beam widths
• Seismic and high-wind load construction where increased uplift resistance is required
• Applications involving special, custom, or rough-cut lumber where rotated strap configurations are needed

Options

• Contact us for Configurable Options and Special orders
• Straps may be rotated where W1 != W2.
  
• For special, custom, or rough-cut lumber sizes, provide dimensions. An optional W2 dimension may be specified. (The W2 dimension on straps rotated 90 deg. is limited by the W1 dimension.)

Frequently Asked Questions

What post and beam sizes is the CC44ROT compatible with?

The CC44ROT is designed for use with 4x4 posts and beams with a 31/2-inch width, making it purpose-built for standard dimensional lumber used in structural wood framing applications.

What does the rotated strap design mean for installation?

The rotated strap design allows the straps to be rotated in configurations where the beam width (W1) does not equal the post width (W2), providing greater installation flexibility when working with varied framing configurations.

How does the extended bearing seat improve structural performance?

The seat of the CC44ROT extends beyond each side of the column, providing additional surface area of bearing that helps distribute the load from the beam more evenly and delivers superior support at the column-beam connection.

Is the CC44ROT suitable for use in areas subject to high wind or seismic loading?

Yes. The CC44ROT features enhanced uplift resistance with uplift loads increased to accommodate earthquake and wind loading requirements, and its bolt spacing meets NDS code requirements to ensure optimal structural performance in demanding conditions.