The Simpson BA610 top-flange joist hanger is a heavy-duty connector built for both engineered wood and solid sawn lumber framing applications, sized to fit nominal 6x10 members. Manufactured by Simpson, this one-piece hanger supports a range of structural load conditions - carrying medium loads with solid sawn lumber and higher loads when paired with engineered wood products. The BA series supports minimum nailing with positive-angle nailing (PAN) to address moderate load conditions, and maximum nailing to handle heavier demands, giving contractors and builders flexibility across a variety of framing scenarios. Formed from 12-gauge steel with a G90 zinc galvanized finish, the BA610 is a reliable choice for joist-to-header connections where rotation control and corrosion resistance are priorities.

Key Features

• Cost-effective one-piece design - eliminates the added expense of welded hangers while maintaining structural integrity for joist-to-header connections.
• Full-height joist flange - captures the top chord of the joist to prevent rotation and eliminate the need for web stiffeners, simplifying installation and reducing additional hardware costs.
• Positive-angle nailing (PAN) support - allows minimum nailing for moderate load conditions and maximum nailing for higher load demands, so the hanger adapts to the requirements of the job.
• 12-gauge steel construction - provides the thickness and rigidity needed to support medium to higher structural loads in wood framing applications.
• G90 zinc galvanized finish - delivers corrosion resistance suited to exterior and treated-lumber environments, helping the hanger maintain performance over time.
• Available for sloped and/or skewed configurations - accommodates non-standard framing angles, giving builders options when standard square connections are not practical.

Why This Product

• One-piece construction saves time and money - unlike multi-piece or welded hangers, the BA610 arrives ready to install with no assembly required, reducing labor on the job site.
• Rotation prevention built in - the full-height joist flange locks the top chord of the 6x10 joist in place, eliminating the need for web stiffeners and keeping the framing square and stable without extra components.
• Flexible load performance - because the hanger supports both minimum and maximum nailing schedules, a single product can serve moderate load conditions with solid sawn lumber or step up to higher loads with engineered wood products, reducing the need to stock multiple hanger types.
• Corrosion-resistant finish for lasting durability - the G90 zinc galvanized coating protects the 12-gauge steel from moisture and corrosion, making the BA610 a dependable long-term solution in demanding framing environments.

Specifications

• Model Number: BA610
• Nominal Member Size: 6x10
• Steel Gauge: 12
• W (in.): 5-1/2
• H (in.): 9-1/8
• B (in.): 3
• TF (in.): 2-1/2
• Coating / Finish: Zinc Galvanized, G90
• Country of Origin: Canada

Approved Applications

• Engineered wood product framing connections
• Solid sawn lumber framing connections
• Top-flange joist-to-header connections requiring positive-angle nailing
• Moderate to higher load conditions depending on nailing schedule and member type

Installation

• Install with 0.162 in. x 3-1/2 in. nails in the header
• Install with 0.148 in. x 1-1/2 in. nails in the joist

Options

• Other widths are available; specify W dimension (the minimum W dimension is 1 9/16").
  
• For modified hangers, fastener quantity listed in tables may need to increase depending on joist size, skew and slope. All modified hangers are 12 ga.
• Hangers may be modified for slopes and/or skews up to 45 deg.. The top flanges may be sloped as much as 35 deg. and may be open or closed up to 30 deg.. See Modifications and Associated Load Reductions under Specifications
• Contact us for Customizations and Special orders

Frequently Asked Questions

What size lumber is the BA610 designed to fit?

The BA610 is designed to fit nominal 6x10 lumber and can be used with both solid sawn lumber and engineered wood products.

What nails are required to install the BA610?

Installation requires 0.162 in. x 3-1/2 in. nails in the header and 0.148 in. x 1-1/2 in. nails in the joist.

Can the BA610 be used for sloped or skewed installations?

The BA610 is available for special order to accommodate sloped and/or skewed members, making it adaptable to non-standard framing conditions.

What is the BA610 made from, and how is it protected against corrosion?

The BA610 is made from 12-gauge steel and features a Zinc Galvanized, G90 coating that provides corrosion resistance.