The Simpson MCR07512 3/4 in. x 12 in. Carbide Tipped Rebar Cutter is a precision cutting bit from Simpson Strong-Tie, built to handle one of the most common obstacles in concrete drilling: rebar and wire mesh blocking the intended hole location. When hole placement conflicts with embedded reinforcement, this bit enables the rebar to be removed so the hole can be drilled to the proper depth - keeping work on schedule without compromising placement accuracy. Part of Simpson Strong-Tie's complete line of premium-quality drill bits, core bits, and chisels, the MCR07512 is manufactured to demanding tolerances and designed to maximize production on the jobsite.

Key Features

• Carbide tipped construction - delivers the hardness and wear resistance needed to cut through rebar and wire mesh, extending the working life of the bit under demanding conditions
• 3/4 in. diameter - sized to clear rebar cleanly so the follow-up hole can be drilled to its required dimensions without deviation
• 12 in. drilling depth with approximately 15 in. overall length - provides the reach needed to address reinforcement positioned deeper within concrete slabs or walls
• Compatible shank adaptor required (sold separately) - designed to pair with a rotohammer via a dedicated shank adaptor, allowing use with the rotohammer already on your jobsite
• One shank adaptor works across all rebar cutter sizes - a single compatible shank can be used with multiple Simpson rebar cutter diameters, reducing the number of accessories you need to carry

Why This Product

• Solves a specific and costly jobsite problem - rather than re-locating a hole or improvising a workaround, this bit gives crews a direct solution for removing conflicting rebar so drilling can proceed exactly where the layout requires
• Built to production demands - manufactured to demanding tolerances, this bit is engineered to perform consistently on busy jobsites where downtime from tool failure is not acceptable
• Integrates into your existing rotohammer setup - because one shank adaptor works with all sizes of rebar cutters in the Simpson lineup, adding this bit to your toolkit does not require a separate dedicated tool or redundant accessories
• Backed by a recognized name in structural products - Simpson Strong-Tie's complete line approach to drilling and demolition accessories means this rebar cutter is designed alongside compatible products, supporting consistent performance across your drilling workflow

Specifications

• Model Number: MCR07512
• Diameter: 3/4 in.
• Drilling Depth: 12 in.
• Overall Length: Appx. 15 in.
• Material: Carbide Tipped
• Country of Origin: United States

Frequently Asked Questions

Does this rebar cutter include a shank?

No. A shank adaptor designed for the rotohammer in use is required and is sold separately. The shank is not included with this bit.

Will a separately purchased shank work with different sizes of rebar cutters?

Yes. Shanks work with all sizes of rebar cutters, so a single compatible shank adaptor can be used across multiple rebar cutter sizes.

What is the maximum drilling depth for the MCR07512?

The MCR07512 has a drilling depth of 12 in., with an overall length of approximately 15 in.

What is the intended use for this rebar cutter bit?

When hole placement conflicts with rebar or wire mesh, this bit enables the rebar to be removed so the hole can be drilled to the proper depth. It is designed for use with a rotohammer and a compatible shank adaptor.