The Simpson ICFVL6 Ledger Connector with 6-in. Legs is engineered by Simpson to solve one of the most demanding challenges in ICF construction: securely mounting wood or steel ledgers to insulated concrete form walls with both vertical and lateral in-plane performance. Unlike traditional anchor bolting, this ledger connector system delivers better on-center spacing in most cases, faster installation, and a clean, protrusion-free result - making it a practical upgrade for builders working with ICF wall systems.

Key Features

• 6-in. embedded legs with embossed stiffening - the embossments along the legs increase rigidity once cast into the concrete, helping the connector resist the loads transferred from the ledger connection above.
• Accommodates ICF wall forms up to 3 1/4-in. thick - sized to fit common ICF form thicknesses, so the connector integrates cleanly into your wall assembly without modification.
• Two diamond-shaped center holes for temporary screw fastening - lets installers pin the connector firmly to the ICF form before and during the concrete pour, keeping it properly aligned; center screws are removed prior to ledger installation so the structural flange remains unobstructed.
• Center hole in the embedded section allows concrete to flow through and around the connector - promotes full encapsulation in the concrete pour, which directly supports the connector's load-transfer performance.
• 14-gauge steel construction with G90 zinc galvanized finish - the heavy-gauge steel provides structural strength at the ledger-to-ICF interface, while the G90 galvanized coating guards against corrosion in typical construction environments.
• Compatible with ICFVL-W and ICFVL-CW companion hardware (sold separately) - pairing with the ICFVL-W for single 2x ledger sizes or the ICFVL-CW for single LVL ledger sizes completes the wood ledger connection system, giving builders flexibility across common framing scenarios.

Why This Product

• Faster ledger attachment compared to traditional anchor bolting - the ICFVL6 system is designed for quicker installation with no protrusions left behind, reducing labor time and eliminating the interference issues that protruding anchors can create during ledger placement.
• Engineered for dual-direction load performance - the connector is specifically designed to handle both vertical and lateral in-plane forces at the ledger connection, addressing the structural demands that ICF wall assemblies place on ledger attachment points.
• Built-in alignment and positioning controls during the pour - the diamond-shaped holes and temporary screw fastening method give installers a reliable way to hold the connector in exact position while concrete is placed, reducing the risk of misalignment that could affect ledger installation later.
• Made in the United States from 14-gauge galvanized steel - domestic production and G90 galvanized protection combine to deliver a connector built to consistent quality standards with durability suited to structural ICF ledger applications.

Specifications

• Model Number: ICFVL6
• Gauge: 14
• Leg Length: 6 in.
• Max ICF Wall Thickness: 3 1/4 in.
• Coating/Finish: Zinc Galvanized, G90
• Country of Origin: United States

Approved Applications

• Mounting wood ledgers to insulated concrete form (ICF) walls
• Mounting steel ledgers to insulated concrete form (ICF) walls
• Applications requiring both vertical and lateral in-plane performance at the ledger connection

Frequently Asked Questions

What is the maximum ICF wall thickness the ICFVL6 can accommodate?

The ICFVL6 accommodates up to 3 1/4-in. thick ICF wall forms.

What additional components are needed for wood ledger applications?

For wood ledger applications, the ICFVL-W is required for single 2x ledger sizes, or the ICFVL-CW is required for single LVL ledger sizes. Both are sold separately.

What is the purpose of the diamond-shaped holes in the center of the connector?

The two diamond-shaped holes allow screw installation to hold the connector in place during the concrete pour and to aid in proper alignment during installation. The center screws must be removed prior to ledger installation.

How does the ICFVL6 improve upon traditional anchor bolting methods?

The ICFVL6 system offers better on-center spacing in most cases, faster installation, and no protrusions compared to traditional anchor bolting methods.

Related Products

• ICFVL8
• ICFVL-W
• ICFVL-CW.

Note: For wood ledger applications, the ICFVL-W or ICFVL-CW is required (sold separately).