The Simpson MBHU5.50/9.25KT galvanized masonry beam hanger delivers a dependable face-mounted connection between structural beams and masonry or concrete walls, engineered as a non-welded, one-piece connector built from 10-gauge steel with a Zinc Galvanized G90 coating. Sized at 5-1/2 in. x 9-1/4 in., this hanger supports solid sawn lumber, engineered wood beams, and trusses, and comes as a complete kit - both Titen HD screw anchors and Strong-Drive SDS Heavy-Duty Connector screws are included so installation can begin without sourcing additional hardware.

Key Features

• Non-welded, one-piece steel construction - eliminates weld failure points and simplifies handling, delivering consistent structural integrity right out of the box.
• 10-gauge steel with Zinc Galvanized G90 coating - provides meaningful corrosion resistance, helping the hanger hold up in demanding interior structural environments.
• Post-wall installation via Titen HD screw anchors - because the anchors are installed after the wall is built, precise placement is far easier to achieve than with cast-in-place bolts, reducing alignment errors on the job.
• Compatible with solid sawn lumber, engineered wood beams, and trusses - gives builders and contractors flexibility across a wide range of beam-to-masonry or beam-to-concrete connection applications.
• Complete kit includes (2) 3/4-in. x 5-in. Titen HD anchors and (12) 1/4-in. x 2-1/2-in. Strong-Drive SDS Heavy-Duty Connector screws - everything needed for a finished installation arrives together, saving time and eliminating extra trips to the supply house.

Why This Product

• Fastener-inclusive kit means no guesswork on hardware - the matched Titen HD anchors and Strong-Drive SDS screws are selected by Simpson to work with this hanger, so builders get a fully coordinated connection system without hunting down compatible fasteners separately.
• Simplified anchor placement compared to cast-in-place methods - installing the Titen HD screw anchor into an already-completed wall lets crews position it exactly where the beam lands, cutting down on layout errors and rework that cost time on masonry projects.
• Broad beam compatibility in a single hanger size - supporting solid sawn lumber, engineered wood products, and trusses in one connector makes this hanger a practical choice for contractors who need a reliable beam-to-masonry solution across varied framing scenarios.
• Trusted Simpson engineering in a proven one-piece design - the non-welded, single-piece form factor and G90 galvanized finish reflect the same attention to structural performance and durability that structural connectors from Simpson are known for.

Specifications

• Model Number: MBHU5.50/9.25KT
• Seat Width: 5-1/2 in.
• Seat Height: 9-1/4 in.
• Member Size: 5-1/2 in. x 9-1/4 in.
• Steel Gauge: 10-gauge
• Coating / Finish: Zinc Galvanized, G90
• Connector Type: Non-welded, one-piece
• Country of Origin: United States

Approved Applications

• Connecting beams to masonry walls
• Connecting beams to concrete walls
• Support of solid sawn lumber beams
• Support of engineered wood beams
• Support of trusses

Important Notes:

• The carbon-steel Titen HD anchor is not recommended for exposed exterior applications.
• A moisture barrier between the beam and wall must be provided per jurisdictional requirements.

What's Included

This kit includes everything needed for a complete installation:

• (2) 3/4-in. x 5-in. Titen HD screw anchors
• (12) 1/4-in. x 2-1/2-in. Strong-Drive SDS Heavy-Duty Connector screws
• (1) MBHU 5-1/2-in. x 9-1/4-in. galvanized masonry beam hanger