Product Description
The Baileigh Compact Hydraulic Shear SH-8014 from Baileigh Industrial is engineered for fabrication shops that demand precise, repeatable sheet metal cutting across an 80-inch cutting width. With a fully hydraulic drive system, rigid all-steel frame construction, and a versatile three-mode operator console, this machine delivers consistent, professional-grade results on mild steel ranging from 24-gauge up to 14-gauge - all while maintaining a compact footprint suitable for smaller production environments.
Key Features
- 80-inch cutting length with up to 26 strokes per minute for high-throughput production
- 14-gauge mild steel maximum capacity with a minimum capacity of 24-gauge mild steel
- 3 hp motor runs on 220-volt 3-phase power for reliable, consistent hydraulic performance
- Adjustable 24-inch back gauge ensures precise repeatability across repeated cuts
- Front support arms and table guides keep the material square to the blade throughout every cut
- Three modes on the operator console give you full control over every cut cycle:
- Inch mode: Jog the control and ease the blade down to the material
- Single mode: Make one cut cycle per foot pedal push
- Auto mode: Continue cycling as you hold the pedal down
- Comes standard with high carbon chromium blades for long-lasting sharpness and durability
- Blades feature 4 shearing edges - simply turn a blade when one edge dulls to extend blade life and save money on replacements
- Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life
- Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy
Specifications
- MPN: BA9-1007207
- Brand: Baileigh Industrial
- Cutting Length: 80 in.
- Maximum Cutting Capacity: 14-gauge mild steel
- Minimum Cutting Capacity: 24-gauge mild steel
- Maximum Strokes Per Minute: 26
- Motor: 3 hp
- Power Requirement: 220-volt, 3-phase
- Back Gauge: 24 in., adjustable
- Blade Material: High carbon chromium
- Shearing Edges Per Blade: 4
- Frame Construction: Fully welded steel plate
- Country of Origin: Taiwan
Frequently Asked Questions
- What is the thickest material the SH-8014 can cut?
- The SH-8014 has a maximum cutting capacity of 14-gauge mild steel across its full 80-inch cutting length.
- What are the three operating modes available on the operator console?
- The operator console offers Inch mode - which lets you jog the control and ease the blade down to the material - Single mode, which makes one cut cycle per foot pedal push, and Auto mode, which continues cycling as long as you hold the pedal down.
- How does the back gauge improve cut accuracy?
- The adjustable 24-inch back gauge allows you to set a precise stop position for your material, ensuring every cut is made at exactly the same dimension and delivering reliable repeatability throughout your production run.
- How do I extend the service life of the blades?
- Each blade has 4 shearing edges. When one edge becomes dull, simply turn the blade to expose a fresh edge. This means each blade can be used up to four times before replacement is needed, significantly reducing tooling costs over time.
This item will be shipped to you directly from the manufacturer.
Processing and fulfillment times are subject to manufacturer availability. If there are any delays, you will be contacted by us with a more accurate delivery timeframe.
FREIGHT SHIPMENTS
It is important to assess the product being shipped against your location and material-handling capabilities.
Please be aware that your location needs to be prepared to properly handle and sign for freight shipments. You need to have access to a dock location, a forklift or the ability to unload the product from the freight carrier's trailer.
If your location does not have a traditional loading dock or forklift to unload your LTL freight out of the trailer, a Lift gate service will be required. There will be an additional charge for the service. It varies by carrier and even by market with different carriers. It often depends on the supply and demand of lift gate equipped trucks in your area.
Some machines require Flatbed shipping. There will be an additional charge for this service. Flatbed shipping is for the transportation of cargo that cannot be loaded or unloaded from a dock, or does not fit within the dimensions of standard truck trailers. A flatbed’s design allows for cranes and forklifts to load goods from all angles.
If a shipment is too heavy or the footprint (i.e., panel saws, metalworking lathes, mill/drills) is too large to ship via small parcel carrier (USPS, UPS or FedEx), it is shipped via a freight carrier. Freight shipments are considered tail gate deliveries, meaning that the driver is only responsible for moving the shipment to the rear of the trailer and will not assist with unloading.
For non-commercial deliveries, the freight carrier will contact you to schedule a delivery window and confirm if lift gate services are required. If lift gate service is requested, the driver is responsible for lowering the product to the ground during delivery. Freight shipments delivered to a residential location are considered curb side deliveries, meaning the driver will make the delivery in the street at the end of the customer’s driveway. Freight Carriers are not required to enter driveways to make residential deliveries due to liability and safety issues.
Although most deliveries go smoothly, sometimes there are exceptions beyond our control. Machines weighing over 2,000 pounds, bulky and oversized machines with a large footprint may not be able to be delivered via a lift gate for risk of injury or damage to the machine. There are also inaccessible remote, residential or high density urban areas that freight carriers cannot safely access. If encountered, such shipments are available for dock delivery or will be required to be picked up from the carrier’s terminal.
If you have any questions about freight delivery options, contact us at info@FactoryDirectSupplyOnline.com
Reviews
FAQs
Standard Shipping is free on orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.