Simpson TNT18314TF Titen Turbo 3/16 in. x 3-1/4 in. 6-Lobe Flat-Head Concrete and Masonry Screw Anchor by Simpson Strong-Tie is a high-performance screw anchor engineered for fast, reliable fastening into concrete and masonry. The patented Torque Reduction Channel between the threads gives drilling dust a place to go, significantly reducing torque-related issues like binding, stripping, and snapping - delivering consistently trouble-free installation and fastening strength you can depend on.

Key Features

• Torque Reduction Channel that traps dust where it can't obstruct the thread action, reducing the likelihood of binding in the hole
• Code listed in accordance with ICC-ES AC193 for concrete applications without cleaning dust from predrilled holes (IAPMO UES ER-712)
• Serrated screw point for easier starts when fastening wood
• Matched-tolerance bit not required; use a standard ANSI drill bit for installation
• Zinc plated with a baked-on ceramic coating
• Designed for installation with a cordless drill or impact driver
• 6-lobe flat head style for a smooth installed profile (T25 driver bit included)
• Use in dry interior environments only

Specifications

• Model Number: TNT18314TF
• Diameter: 3/16 in.
• Length: 3-1/4 in.
• Head Type: Flat Head
• Drive Type: T25 6-Lobe
• Material: Carbon Steel
• Coating: Zinc Plated with Ceramic Coating
• Color: Blue
• Drill Bit Diameter: 5/32 in.
• Installation Tool: Cordless drill or impact driver with standard ANSI drill bit
• Country of Origin: Taiwan

Approved Applications

• Concrete anchoring applications per ICC-ES AC193 (IAPMO UES ER-712)
• Wood-to-concrete fastening
• Masonry anchoring applications
• Dry interior environments only

What's Included

Each pack contains (100) Titen Turbo Flat-Head Screws, T25 driver bit.

Frequently Asked Questions

Do I need a special matched-tolerance drill bit to install the Titen Turbo screw anchor?

No. A matched-tolerance bit is not required. You can install the Titen Turbo using a standard ANSI drill bit sized at 5/32 in. in diameter.

Can I install this screw anchor without cleaning the dust out of the predrilled hole?

Yes. The Titen Turbo is code listed in accordance with ICC-ES AC193 for concrete applications without cleaning dust from predrilled holes (IAPMO UES ER-712). The Torque Reduction Channel traps dust where it cannot obstruct the thread action.

What tool should I use to drive the Titen Turbo screw anchor?

The Titen Turbo is designed for installation with a cordless drill or impact driver using a T25 6-lobe driver bit, which is included with this product.

Is the Titen Turbo suitable for outdoor or wet environments?

No. This screw anchor is intended for use in dry interior environments only. The zinc plated with baked-on ceramic coating is designed for interior applications.

Note: Product dimensions and/or thread length may differ from picture. Please refer to the specifications listed above for accurate dimensions.