The CMT ITK-Plus Finish Blade for Sliding Compound Miter Saws is a 10-inch, 60-tooth saw blade engineered to deliver smooth, splinter-free results on hardwood, softwood, plywood, and double-sided laminate. Built around an Alternate Top Bevel tooth geometry with a 15 deg. bevel angle and a low 7 deg. hook angle, this blade is purpose-built for the controlled, clean crosscuts that finish carpentry and cabinetry demand. Whether you are trimming molding, cutting panels, or working through dense hardwood on a sliding compound miter saw, the CMT ITK-Plus geometry keeps tearout to a minimum and surface quality consistently high.

Key Features

• ATB 15 deg. Tooth Grind - the Alternate Top Bevel geometry at 15 deg. shears wood fibers cleanly on both sides of the cut, reducing tearout and producing finish-ready edges on hardwood, softwood, and laminated sheet goods.
• Low 7 deg. Hook Angle - a shallower hook angle slows tooth engagement and keeps the blade from grabbing, which translates to smoother cuts and safer operation on a sliding compound miter saw.
• 60-Tooth Configuration - a higher tooth count means more cutting edges contact the material per revolution, producing finer surface finishes suited to trim work, cabinetry, and double-sided laminate where surface quality matters.
• HW (Tungsten Carbide) Tip Material - hard carbide tips hold a sharp edge longer than standard steel, extending the interval between sharpenings and sustaining cut quality through demanding production use.
• 0.102 in. Kerf with 0.071 in. Plate Thickness - the thin kerf design removes less material per pass, reducing waste and the load on the saw motor, making this blade compatible with both high-powered stationary saws and lighter sliding miter saw platforms.
• 5/8 in. Bore Diameter - matches the standard arbor size on most 10-inch miter saws and table saws, allowing straightforward installation without adapters.
• 7,600 RPM Rating - rated for high-speed operation so the blade can keep pace with the full spindle speed of typical 10-inch sliding compound miter saws without risk of overspeed.

Why This Product

• Designed specifically for sliding compound miter saws - the low hook angle and 60-tooth ATB geometry work together to handle the longer stroke and varied grain directions encountered in sliding miter cuts, where blade control is critical to a clean finish.
• Handles rip and cross-grain cutting on hardwood, softwood, plywood, and double-sided laminate - a single blade that moves between material types without swapping out, saving time during mixed-material finish carpentry jobs.
• The 0.102 in. thin kerf reduces motor strain, which is especially useful when using a sliding compound miter saw at the limits of its capacity or when running a cordless platform where battery draw matters.
• A 7,600 RPM rating means the blade is matched to the actual operating speeds of 10-inch sliding miter saws, so you are never forced to run the saw below its rated speed to protect the blade.

Specifications

• Manufacturer Part Number: P10060S
• Brand: CMT Orange Tools
• Diameter: 10 in.
• Bore Diameter: 5/8 in. (15.88 mm)
• Number of Teeth: 60
• Tooth Grind: ATB 15
• Hook Angle: 7 deg.
• Kerf Thickness: 0.102 in.
• Plate Thickness: 0.071 in.
• Maximum RPM: 7,600
• Tip Material: HW (Tungsten Carbide)

Approved Applications

• Finish cuts on sliding compound miter saws
• Rip and cross-grain cuts in hardwood
• Rip and cross-grain cuts in softwood
• Cutting plywood panels
• Cutting double-sided laminate