The Simpson Strong-Tie DGT2.37/16 DGT Top-Flange Fire Wall Hanger is engineered for multifamily, multilevel Type III residential construction where fire-rated framing connections are required. Designed to fit 2-5/16 in. x 16 in. engineered wood members, this patent-pending hanger is load tested, fire rated, and is the first fire wall hanger designed for installation with a power nailer - saving critical time before drywall is hung and helping keep construction projects on schedule. Tested to ASTM E814 standards and carrying a two-hour fire-resistant rating, the DGT2.37/16 delivers proven performance on both sides of the wall. Made in the United States from 12-gauge steel with a G90 galvanized finish, it is backed by Simpson Strong-Tie's expert service and technical support.

Key Features

• Loads tested and code listed for 1-1/2 in. and 2-1/2 in. power-driven or hand-installed nails
• Two-hour fire rating applies to 2x4 or thicker walls
• Innovative top-flange design for back-to-back installation on 2x6 (min.) walls
• Space for two layers of 5/8-in. drywall after framing is complete
• Two-hour Fire-Resistant rating - Intertek Design No. SST/WPCF 120-01
• Tested according to ASTM E814 and fire rated for use on both sides of the wall
• Made from 12-gauge steel with Zinc Galvanized (G90) coating for corrosion resistance
• Made in the United States and backed by expert service and technical support

Specifications

• MPN: DGT2.37/16
• Brand: Simpson Strong-Tie
• Member / Joist Size: 2-5/16 in. x 16 in.
• Seat Width: 2-3/8 in.
• Height: 15-15/16 in.
• Gauge: 12
• Coating / Finish: Zinc Galvanized, G90
• Fire Rating: Two-hour fire-resistant rating - Intertek Design No. SST/WPCF 120-01
• Test Standard: ASTM E814
• Installation Fasteners: Install with (6) 0.148 in. x 1-1/2 in. OR 0.148 in. x 2-1/2 in. nails in the top; (2) 0.148 in. x 1-1/2 in. nails OR (4) 0.148 in. x 2-1/2 in. nails in the face; and (6) 0.148 in. x 1-1/2 in. nails in the joist (sold separately)
• Country of Origin: United States

Approved Applications

• Multifamily residential construction requiring fire-rated framing connections
• Multilevel Type III residential construction
• Fire wall assemblies requiring two-hour fire-resistant ratings on both sides of the wall
• Back-to-back installation on 2x6 minimum walls using the top-flange design
• Installations where two layers of 5/8-in. gypsum board must be slipped in after framing
• Projects requiring power nailer installation to reduce labor time before drywall hanging

Options

• Contact us for Configurable Options and Special orders

Frequently Asked Questions

What is the fire rating for the DGT2.37/16 fire wall hanger?

The DGT2.37/16 carries a two-hour fire-resistant rating certified under Intertek Design No. SST/WPCF 120-01. It has been tested according to ASTM E814 and is fire rated for use on both sides of the wall. This two-hour rating applies to 2x4 or thicker walls.

Can the DGT2.37/16 be installed with a power nailer?

Yes. The DGT is the first fire wall hanger specifically designed for installation with a power nailer. It is loads tested and code listed for both 1-1/2 in. and 2-1/2 in. power-driven nails, as well as hand-installed nails, providing flexibility on the job site.

How does the top-flange design accommodate drywall installation?

The innovative top-flange design allows the hanger to be installed during framing, leaving space for two layers of 5/8-in. gypsum board (drywall) to be slipped into place after framing is complete. This design also enables back-to-back installation on 2x6 (minimum) walls.

What member size does the DGT2.37/16 support, and what material is it made from?

The DGT2.37/16 is designed for 2-5/16 in. x 16 in. engineered wood members with a seat width of 2-3/8 in. It is constructed from 12-gauge steel with a Zinc Galvanized (G90) finish for corrosion resistance.

Downloads and Resources

• Two-hour Fire-Resistant rating Intertek Design No. SST/WPCF 120-01
• Specifications

Note: Product dimensions may differ from picture.