The Simpson Strong-Tie DGHT Top-Flange Fire Wall Hanger (DGHT7.12/16) is a patent-pending, load-tested connector engineered for multifamily, multilevel Type III residential construction. Designed to fit 7 in. x 16 in. engineered wood joists, this innovative hanger carries a two-hour fire rating and is the first fire wall hanger built to install with a power nailer - saving valuable time before drywall goes up and helping keep construction projects on schedule. Tested to ASTM E814, the DGHT is fire rated for use on both sides of the wall and holds Intertek Design No. SST/WPCF 120-01 certification.

Key Features

• Loads tested and code listed for 1-1/2 in. and 2-1/2 in. power-driven or hand-installed nails
• Two-hour fire rating applies to 2x4 or thicker walls
• Innovative top-flange design for back-to-back installation on 2x6 (min.) walls
• Space for two layers of 5/8-in. drywall after framing
• Two-hour Fire-Resistant rating Intertek Design No. SST/WPCF 120-01
• First fire wall hanger designed to install with a power nailer
• Tested according to ASTM E814 and fire rated for use on both sides of the wall
• Made from 10-gauge steel for heavy-duty structural performance
• Galvanized (G90) finish for corrosion resistance
• Made in the United States

Specifications

• MPN: DGHT7.12/16
• Brand: Simpson Strong-Tie
• Member / Joist Size: 7 in. x 16 in.
• Seat Width: 7-1/8 in.
• Height: 15-15/16 in.
• Gauge: 10
• Coating / Finish: Zinc Galvanized, G90
• Fire Rating: Two-hour fire rating (2x4 or thicker walls)
• Fire Rating Certification: Intertek Design No. SST/WPCF 120-01
• Test Standard: ASTM E814
• Installation Fasteners: Install with (6) 0.148 in. x 1-1/2 in. OR 0.148 in. x 2-1/2 in. nails in the top; (2) 0.148 in. x 1-1/2 in. nails OR (4) 0.148 in. x 2-1/2 in. nails in the face; and (6) 0.148 in. x 1-1/2 in. nails in the joist (sold separately)
• Country of Origin: United States

Approved Applications

• Multifamily residential construction
• Multilevel Type III residential construction
• Fire wall assemblies requiring a two-hour fire-resistant rating
• Back-to-back joist hanger installation on 2x6 (minimum) walls
• Applications requiring drywall installation after framing (accommodates two layers of 5/8-in. gypsum board)

Options

• Contact us for Configurable Options and Special orders

Frequently Asked Questions

What fire rating does the Simpson DGHT7.12/16 carry, and how is it certified?

The DGHT7.12/16 carries a two-hour fire-resistant rating that applies to 2x4 or thicker walls. It has been tested according to ASTM E814 and is certified under Intertek Design No. SST/WPCF 120-01. The rating applies to use on both sides of the wall.

Can the DGHT7.12/16 be installed with a power nailer?

Yes. The DGHT is the first fire wall hanger specifically designed to install with a power nailer. It is loads tested and code listed for both 1-1/2 in. and 2-1/2 in. power-driven nails, as well as hand-installed nails, providing flexibility on the job site.

How does the top-flange design accommodate drywall installation?

The innovative top-flange design allows the hanger to be installed before drywall is hung. It provides space for two layers of 5/8-in. gypsum board (drywall) to be slipped into place after framing is complete, keeping the construction workflow on schedule.

What is the minimum wall thickness required for back-to-back installation of the DGHT7.12/16?

The DGHT7.12/16 top-flange design supports back-to-back installation on walls that are 2x6 (minimum) in thickness. The two-hour fire rating applies to these assemblies when used with 2x4 or thicker walls.

Downloads and Resources

• Two-hour Fire-Resistant rating Intertek Design No. SST/WPCF 120-01
• Specifications

Note: Product dimensions may differ from picture.