JET J-7040M-4 10" x 16" Horizontal Mitering Bandsaw from JET delivers industrial-grade cutting performance with a uniquely engineered swiveling head design that lets operators make precise crosscuts and miter cuts at any angle from 0 deg. - 45 deg. while the workpiece stays firmly secured in place. Built around a heavy-duty variable speed drive system, cast iron blade wheels, and a refined hydraulic downfeed control, this saw is engineered for production environments demanding consistent, accurate results cut after cut.

Key Features

• Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades for precise blade tracking and support
• Adjustable Material Stop allows repeatable cuts at consistent lengths without re-measuring
• Cast iron blade wheels provide exceptional rigidity, vibration damping, and long-term durability
• Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder for smooth, controlled cutting pressure
• Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath for reliable, low-maintenance power transfer
• Mitering head swivels to cut any angle 0 deg. - 45 deg. while the work piece remains secured, eliminating awkward stock repositioning
• Swing away control panel houses major saw controls for convenient, ergonomic operator access
• Blade rides on two load bearings mounted on a pivot shaft with the side bearings and carbide pads assisting in distributing the load equally for extended blade life
• Variable speed drive system allows the operator to match blade speed precisely to the material being cut

Specifications

• MPN: JT9-414484
• Drive Type: Variable Speed
• Motor: 2 HP, 460, 3Ph
• Prewired Voltage: 460 V
• Blade Wheel Diameter: 14 in.
• Round Capacity at 90 deg.: 10 in.
• Round Capacity at 45 deg.: 8-1/2 in.
• Rectangle Capacity at 90 deg.: 10 x 14 in. and 2 x 16 in.
• Rectangle Capacity at 45 deg.: 8-1/2 x 9 in.
• Vise Swivel Range: 45 deg.
• Overall Dimensions (L x W x H): 76 x 30 x 48 in.
• Weight: 924 lbs.
• Country of Origin: Taiwan
• Prop 65: Cancer and Reproductive Harm

Frequently Asked Questions

How does the mitering head work on this bandsaw?

The mitering head swivels to cut any angle 0 deg. - 45 deg. while the work piece remains secured. This means operators never need to reposition or reclamp the stock to achieve angled cuts, saving time and improving repeatability.

How is the downfeed rate controlled on the J-7040M-4?

The downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder. This combination provides smooth, consistent feed pressure throughout the cut and helps prevent blade binding or stalling.

What type of blade guide system does this saw use?

The saw features an adjustable blade guide with a six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blade. The blade also rides on two load bearings mounted on a pivot shaft, with side bearings and carbide pads assisting in distributing the load equally for stable, accurate blade support.

What is the drive system and why does it matter for cutting different materials?

The J-7040M-4 uses a variable speed drive system, allowing operators to dial in the optimal blade speed for the specific material being cut. The heavy-duty transmission utilizes hardened and ground gears operating in an oil bath to deliver reliable, consistent power with minimal maintenance.