JET J-7020M 10" x 16" Horizontal Mitering Bandsaw from JET delivers professional-grade cutting performance for metalworking shops that demand precision angle cuts without repositioning the workpiece. The swiveling head design allows the cutting head to rotate from 0 deg. to 45 deg. while the stock stays firmly secured in place, eliminating material handling errors and improving throughput on repetitive miter cuts. Powered by a variable speed drive system and built on a 924 lb. cast iron platform, this saw is engineered for heavy production environments where accuracy and durability are non-negotiable.

Key Features

• Mitering head swivels to cut any angle 0 deg. - 45 deg. while the work piece remains secured, eliminating the need to reposition stock between cuts
• Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades for precise blade tracking and control
• Blade rides on two load bearings mounted on a pivot shaft with the side bearings and carbide pads assisting in distributing the load equally, extending blade life and improving cut quality
• Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath for long-lasting, low-maintenance performance under continuous use
• Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder for smooth, controlled material feed rates
• Cast iron blade wheels provide superior mass and vibration dampening for cleaner cuts and reduced blade fatigue
• Variable speed drive system allows the operator to match blade speed to the material being cut
• Swing away control panel houses major saw controls for convenient operator access from a safe working position
• Adjustable Material Stop for repeatable cut lengths without re-measuring between operations
• Backed by JET's industry-leading 2-year warranty with nationwide Authorized Service Center support

Specifications

• MPN: JT9-414474
• Stock Number: 414474
• Drive Type: Variable Speed
• Motor: 1-1/2 HP, 115/230V, 1Ph
• Amperage: 115V: 20A / 230V: 10A
• Prewired Voltage: 230V
• Blade Wheel Diameter: 14 in.
• Rectangle Capacity at 90 deg.: 10 x 14 in. and 2 x 16 in.
• Rectangle Capacity at 45 deg.: 8-1/2 x 9 in.
• Round Capacity at 90 deg.: 10 in.
• Round Capacity at 45 deg.: 10 in.
• Vise Swivel Range: 45 deg.
• Overall Dimensions (L x W x H): 76 x 30 x 48 in.
• Weight: 924 lbs.
• Country of Origin: Taiwan
• Prop 65: Cancer and Reproductive Harm

Frequently Asked Questions

How does the mitering head work on the J-7020M?

The mitering head swivels to cut any angle from 0 deg. to 45 deg. while the work piece remains secured in the vise. This means the operator never needs to reposition or re-clamp the stock to make angled cuts, which improves accuracy and reduces setup time on repetitive miter operations.

What type of blade guide system does this bandsaw use?

The J-7020M features an adjustable blade guide with a six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blade. Additionally, the blade rides on two load bearings mounted on a pivot shaft with side bearings and carbide pads assisting in distributing the load equally for stable, precise blade support throughout the cut.

How is the downfeed rate controlled on this saw?

The downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder. This combination provides smooth, consistent feed pressure that can be regulated to match the material being cut, helping to extend blade life and improve cut surface quality.

What transmission does the J-7020M use, and why does it matter?

The heavy-duty transmission utilizes hardened and ground gears operating in an oil bath. This design reduces wear, dissipates heat, and minimizes maintenance requirements, making the saw well suited to demanding production environments where the machine is in continuous operation.