The BN Products-USA, LLC JMB-25H Heavy Duty Table-Top Rebar Bender is a portable, electrical-mechanical rebar bending machine engineered to bend rebar up to #8 (1 in.) grade 60 - saving valuable man-hours on job sites and in shop environments. Capable of processing multiple bars in a single cycle, this electric rebar bender combines precision angle control with hands-free foot pedal operation, making it a reliable solution for contractors who need consistent, repeatable bends from 0 to 180 deg. without slowing down production.

Key Features

• Preset angle lock for repeatable bends - lock in any angle from 0 to 180 deg. and reproduce the same bend accurately across every bar, eliminating measurement errors and rework on production bending runs.
• Bends multiple bars simultaneously - process up to 4x #3 rebar, 3x #4, 2x #5 or #6, or 1x #7 or #8 rebar in a single cycle, dramatically increasing throughput compared to manual bending methods.
• Roller chart for inside bending diameter selection - guides the operator to the correct roller combination to achieve an inside bending diameter of six times the rebar diameter, meeting proper bend geometry requirements.
• Emergency stop switch included as a standard feature - provides a fast, reliable way to halt operation immediately, protecting both the operator and the workpiece in unexpected situations.
• Four lifting handles included as standard - simplify repositioning and transport of this 210 lb. machine between stations or job sites without the need for additional rigging equipment.
• Standard foot pedal control switch included - frees both hands for guiding and positioning rebar during operation, improving both speed and safety on high-volume bending tasks.
• Nine bending rollers included in a steel carrying case - everything needed for a range of rebar sizes ships with the unit, stored securely in a durable steel toolbox that protects rollers during transport.
• Bending stand included - the machine ships as a complete kit with a dedicated stand, so it is ready to put to work without sourcing additional support hardware.

Why This Product

• For contractors bending grade 60 rebar through #8 size, this machine handles the full range of common structural rebar sizes in a single portable unit - eliminating the need for multiple tools or manual bending bars on complex reinforcement layouts.
• The electrical-mechanical drive completes a 180 deg. bend in 9 seconds, a consistent cycle time that manual or hydraulic alternatives cannot match when processing dozens of identical bends per shift.
• Because the angle selector locks precisely and can be set anywhere from 0 to 180 deg., crews can dial in a specific bend angle once and repeat it accurately throughout a pour without re-measuring, reducing scrap and improving ACI 318-05 compliance on rebar bending.
• The complete kit - including stand, foot pedal, bending rollers in a steel case, and tool kit - ships together, so every component needed to begin bending immediately on arrival is included in a single purchase.

Specifications

• Manufacturer Part Number: JMB-25H
• Manufacturer: BN Products-USA, LLC
• Maximum Rebar Diameter: #8 (1 in.) (25mm) Grade 60
• Bending Angle: 0 - 180 deg.
• Bending Speed: 9 seconds for 180 deg. bend
• Power Supply: 115V 50/60Hz - 15 amps
• Weight: 210 lb.
• Length: 21 in. (540mm)
• Width: 22.6 in. (580mm)
• Height: 17.2 in. (440mm)

What's Included

• Complete rebar bending machine kit
• Foot pedal control switch
• Bender stand
• Roller kit (9 bending rollers in a steel carrying case)
• Tool kit

Frequently Asked Questions

How many bars can the JMB-25H bend at one time?

The JMB-25H can bend 4x #3 rebar, 3x #4 rebar, 2x #5 or #6 rebar, or 1x #7 or #8 rebar simultaneously in a single cycle, making it well suited for high-volume reinforcement fabrication on job sites or in a shop.

What bending angle range does this electric rebar bender support?

The lockable angle selector can be set to any angle from 0 to 180 deg. A preset angle lock allows the operator to repeat the same angle bend consistently across multiple bars without re-measuring each time.

What power supply does the JMB-25H require?

The machine runs on a 115V 50/60Hz power supply drawing 15 amps, which is compatible with standard single-phase electrical service commonly available at construction sites and in shops.

Does the JMB-25H come with everything needed to start bending rebar immediately?

Yes. The complete kit includes the bending machine, a bender stand, 9 bending rollers in a steel carrying case, a tool kit, and a standard foot pedal control switch for hands-free operation - all shipped together as a single package.