The DEWALT D100 50-Foot Self Retracting Lifeline with Galvanized Cable is an anchor-mounted fall protection SRL built for workers who need reliable, full-range coverage across elevated structures, elevated platforms, and demanding industrial job sites. Constructed with a 3/16" galvanized steel cable and a rugged high impact strength polymer housing, it delivers corrosion-resistant durability and meets both ANSI Z359.14-2021 Class 1 and OSHA 1926.502 / 1910.66 compliance standards out of the box. The impact indicating snap hook at the harness end and dual-rated 3,600 lb. connectors at both ends mean workers stay protected while safety managers maintain the visibility they need to keep equipment in service or pull it when it counts.

Key Features

• Dual-Standard Strength Rating - ANSI 310 lbs. (141 kg) and OSHA 420 lbs. (191 kg): Meeting both ANSI Z359.14-2021 Class 1 and OSHA 1926.502 / 1910.66 requirements means safety managers get a single SRL that satisfies multiple compliance frameworks, reducing free fall and arrest forces on the body while simplifying documentation across mixed-regulation job sites.
• 3/16" (4.8 mm) Galvanized Steel Cable Lifeline: Galvanized steel construction fights corrosion in outdoor and industrial environments, so the lifeline holds up through repeated use in wet, abrasive, or chemically exposed conditions without the early degradation that shortens the service life of unprotected cable.
• High Impact Strength Polymer Housing with Recessed Labels: The rugged polymer shell absorbs drops and resists debris and harsh job site conditions, while recessed labels protect critical safety markings from wear - keeping compliance information legible for the full working life of the unit.
• Impact Indicating Snap Hook at Harness End: If the SRL has experienced a fall event, the impact indicator gives safety supervisors an immediate visual cue to take the equipment out of service - removing guesswork from post-incident inspections and helping teams maintain proper safety protocols without delay.
• 3,600 lb. (16kN) Gate Rated Connectors at Both Ends: Both the anchor-end carabiner and the harness-end snap hook are galvanized alloy steel with golden yellow/silver passivation, delivering high-strength, corrosion-resistant connections at every link in the fall arrest chain - so neither the anchor point nor the harness connection is the weak link.
• 50-Foot (15.24 m) Working Length: A full 50 feet of cable reach lets workers move across broad elevated surfaces or large structures without stopping to reposition anchor points, keeping continuous fall protection coverage in place and maintaining job site productivity.
• Compact and Lightweight at 18.61 lbs. (8.44 kg): At 18.61 lbs. (8.44 kg), this SRL imposes less physical load on users than heavier fall protection systems, allowing greater freedom of motion and reducing fatigue during extended shifts at height.
• Tagline Included: The included tagline simplifies controlled deployment and retrieval of the lifeline on elevated platforms, cutting handling time during setup and making the SRL easier to manage in tight or awkward working positions.
• 2-Year Warranty: DEWALT backs this SRL with a 2-year warranty, giving buyers documented assurance of long-term reliability and helping lower total cost of ownership compared to units with shorter or no warranty coverage.

Why This Product

• Built for compliance across multiple regulatory standards: With ratings meeting both ANSI Z359.14-2021 Class 1 and OSHA 1926.502 / 1910.66, this SRL works for contractors and safety managers who operate across job sites governed by different fall protection frameworks - one unit satisfies both without additional documentation workarounds.
• Designed for high-wear environments: The combination of a galvanized steel cable lifeline, high impact strength polymer housing with recessed labels, and galvanized alloy steel connectors with passivation means every component is selected for durability in corrosive, abrasive, or repetitive-use conditions - reducing the frequency of replacement and inspection failures.
• Helps safety supervisors act fast after a fall event: The impact indicating snap hook at the harness end provides an immediate visual flag if the unit has arrested a fall, so supervisors can identify compromised equipment quickly and remove it from service without waiting for a formal inspection cycle.
• Gives workers room to move without sacrificing protection: The 50-foot (15.24 m) working length combined with a trip-free connector experience and lightweight 18.61 lb. (8.44 kg) design means workers can cover more ground at height with less physical restriction - making this SRL a practical choice for large elevated work surfaces where frequent repositioning would otherwise interrupt workflow.

Specifications

• Brand: DEWALT
• MPN: DXFP210111-050
• Model: D100 SRL
• Color: Black/Gold
• Working Length: 50' (15.24 M)
• Max Capacity (ANSI): 310 lbs. (141 kg)
• Max Capacity (OSHA): 420 lbs. (191 kg)
• Lifeline Material: 3/16" (4.8 mm) Galvanized Steel Cable
• Housing: High Impact Strength Polymer
• Tagline: Included
• Anchor End Connector: 3,600 lb. (16kN) gate Steel (galvanized alloy steel with golden yellow/silver passivation) Carabiner
• Harness Connector: Impact Indicating 3,600 lb. (16kN) gate Steel (galvanized alloy steel with golden yellow/silver passivation) Snap Hook
• Standards: ANSI Z359.14-2021 Class 1, OSHA 1926.502 and 1910.66
• Warranty: 2 years
• Unit of Measure: 1

Frequently Asked Questions

What standards does the DEWALT DXFP210111-050 SRL meet?

This self retracting lifeline is certified to ANSI Z359.14-2021 Class 1 and complies with OSHA 1926.502 and OSHA 1910.66, making it suitable for both construction and general industry fall protection applications.

What type of cable is used in this self retracting lifeline?

The lifeline uses 3/16" (4.8 mm) galvanized steel cable, which provides corrosion resistance and durability for outdoor and industrial work environments over a 50-foot (15.24 m) working length.

What is the impact indicating hook and why does it matter?

The harness-end connector is an impact indicating snap hook rated at 3,600 lb. (16kN). It provides a visible indicator if the snap hook has been subjected to the forces of a fall event, allowing safety supervisors to identify and remove potentially compromised equipment from service before it is used again.

What is included in the box with the DEWALT D100 SRL?

The package includes the Self Retracting Lifeline and an Anchorage Adapter, giving users the core components needed to deploy the SRL at an anchor point right out of the box.