Simpson SUR210 SUR Galvanized Joist Hanger for 2x10, Skewed Right is a heavy-duty connector from Simpson Strong-Tie engineered to create a strong 45 deg. angled connection between a joist and a header in wood framing applications. Built from 16-gauge steel with a G90 zinc galvanized coating for superior corrosion resistance, this hanger is designed to provide reliable support underneath the joist, rafter, or beam wherever a right-skewed connection is required.

Key Features

• SUR = skewed right, providing a 45 deg. connection between a joist and header
• These hangers will normally accommodate a 40 deg. to 50 deg. skew
• The joist end may be square cut or bevel cut
• Angled nail slots direct nails for proper installation
• Nominal joist size: 2x10 or 2x12
• Made from 16-gauge steel
• Galvanized (G90) for extra corrosion resistance

Specifications

• Model Number: SUR210
• Skew Direction: Right
• Gauge: 16
• Member Size: 2x10 or 2x12
• Width (W): 1-9/16 in.
• Obtuse Flange Length: 1-1/8 in.
• Acute Flange Length: 1-5/16 in.
• Height (H): 8-3/16 in.
• Seat Depth: 2 in.
• Coating/Finish: Zinc Galvanized, G90
• Country of Origin: United States
• Installation Fasteners: 16d common nails in the header and 10d x 1-1/2 in. nails in the joist (sold separately)

Options

• Contact us for Configurable Options and Special orders

Frequently Asked Questions

What does "SUR" stand for and how does it differ from "SUL"?

SUR stands for skewed right. The SUR and SUL hangers are identical in design except that the SUR is skewed 45 deg. to the right while the SUL is skewed 45 deg. to the left, making each suited for its respective framing orientation.

What range of skew angles does the SUR210 accommodate?

These hangers will normally accommodate a 40 deg. to 50 deg. skew, making them suitable for connections that fall within that angular range rather than a strict 45 deg. only.

Does the joist need to be cut at a specific angle to fit this hanger?

No. The joist end may be square cut or bevel cut, providing flexibility during installation without requiring a precise angled cut on the joist.

What fasteners are required to install the SUR210?

Installation requires 16d common nails in the header and 10d x 1-1/2 in. nails in the joist. The hanger features angled nail slots that direct nails for proper installation.

Note: Product dimensions and/or screw or nail holes may differ from picture. See item description for specifications.