Product Features
Product Description
JET JWDS-1632 16" Drum Sander with Stand from JET is a precision-engineered woodworking solution designed to deliver flawlessly smooth surface finishes on a wide range of projects. Powered by a 1-1/2 HP, 1-Phase, 115V motor and paired with a dedicated stand for enhanced stability, this drum sander combines independent motor control, a dynamically balanced aluminum drum, and infinitely variable feed speed to give woodworkers complete command over their sanding process from start to finish.
Key Features
- Self-Cooling Drum keeps the work surface protected from heat damage during extended sanding sessions
- Drum is easily removable for quick sandpaper changes and maintenance
- Drum utilizes sealed and permanently lubricated ball bearings for longer life
- Infinitely variable speed control of up to 10 feet per minute allows the user to choose the optimal feed rate
- Integrated on/off switch and variable speed control are conveniently located for easy operator access
- Precision-flattened reinforced steel conveyor bed ensures consistent, stable workpiece support throughout the sanding pass
- Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and protect the work surface from heat-damage
- Separate feed and drum motors provide independent control, optimizing the performance of the sander
- Stand features a 20" x 37" footprint to increase stability and has a storage shelf and pre-drilled holes for casters
- The relative depth scale on the handwheel allows the user to reset and measure the depth for every project
Specifications
- MPN: JT9-723520K
- Stock Number: 723520K
- Motor Power: 1-1/2 HP
- Motor Amps: 14 A
- Voltage: 115V, 1-Phase
- Recommended Circuit Size: 20 Amps
- Drum Diameter: 5 in.
- Drum Bearing Diameter: 1 in.
- Maximum Board Thickness: 3 in.
- Minimum Board Thickness: 1/32 in.
- Minimum Board Length: 2-3/8 in.
- Maximum Feed Rate: 10 ft/min (infinitely variable)
- Dust Port Outside Diameter: 4 in.
- Dust Collection Minimum CFM Required: 400 CFM
- Stand Footprint: 20" x 37"
- Weight: 156 lbs.
- Country of Origin: Taiwan
- Prop 65: Cancer and Reproductive Harm
Frequently Asked Questions
- Can the drum be removed without special tools?
- Yes. The drum is easily removable, making sandpaper replacement and routine maintenance straightforward without requiring specialized tooling.
- What dust collection setup is required for this drum sander?
- The JWDS-1632 requires a dust collector capable of a minimum of 400 CFM, connected via the 4-inch outside diameter dust port to maintain a clean working environment.
- Does the stand include provisions for adding casters?
- Yes. The stand features pre-drilled holes for casters, making it straightforward to add mobility to the machine when needed. The stand also includes a storage shelf and a 20" x 37" footprint for added stability.
- How does the dual-motor design benefit performance?
- Separate feed and drum motors provide independent control, optimizing the performance of the sander. This means the feed rate and drum speed can each be managed without one affecting the other, allowing finer tuning for different wood species and project requirements.
This item will be shipped to you directly from the manufacturer.
Processing and fulfillment times are subject to manufacturer availability. If there are any delays, you will be contacted by us with a more accurate delivery timeframe.
FREIGHT SHIPMENTS
It is important to assess the product being shipped against your location and material-handling capabilities.
Please be aware that your location needs to be prepared to properly handle and sign for freight shipments. You need to have access to a dock location, a forklift or the ability to unload the product from the freight carrier's trailer.
If your location does not have a traditional loading dock or forklift to unload your LTL freight out of the trailer, a Lift gate service will be required. There will be an additional charge for the service. It varies by carrier and even by market with different carriers. It often depends on the supply and demand of lift gate equipped trucks in your area.
Some machines require Flatbed shipping. There will be an additional charge for this service. Flatbed shipping is for the transportation of cargo that cannot be loaded or unloaded from a dock, or does not fit within the dimensions of standard truck trailers. A flatbed’s design allows for cranes and forklifts to load goods from all angles.
If a shipment is too heavy or the footprint (i.e., panel saws, metalworking lathes, mill/drills) is too large to ship via small parcel carrier (USPS, UPS or FedEx), it is shipped via a freight carrier. Freight shipments are considered tail gate deliveries, meaning that the driver is only responsible for moving the shipment to the rear of the trailer and will not assist with unloading.
For non-commercial deliveries, the freight carrier will contact you to schedule a delivery window and confirm if lift gate services are required. If lift gate service is requested, the driver is responsible for lowering the product to the ground during delivery. Freight shipments delivered to a residential location are considered curb side deliveries, meaning the driver will make the delivery in the street at the end of the customer’s driveway. Freight Carriers are not required to enter driveways to make residential deliveries due to liability and safety issues.
Although most deliveries go smoothly, sometimes there are exceptions beyond our control. Machines weighing over 2,000 pounds, bulky and oversized machines with a large footprint may not be able to be delivered via a lift gate for risk of injury or damage to the machine. There are also inaccessible remote, residential or high density urban areas that freight carriers cannot safely access. If encountered, such shipments are available for dock delivery or will be required to be picked up from the carrier’s terminal.
If you have any questions about freight delivery options, contact us at info@FactoryDirectSupplyOnline.com
Reviews
FAQs
Standard Shipping is free on orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.