Product Description
The CMT 807.004.11 File-Free Flush Trim Bit for Laminate is a precision-engineered 2-flute routing bit designed to deliver smooth, file-free results when trimming plastic laminates and similar surface materials. With a 1/2 in. cutting diameter, 3/8 in. cutting height, and a subtle 1/64 in. radius, this bit leaves edges so clean and smooth to the touch that no additional filing or hand-finishing is required after the cut. Built for right-hand rotation and compatible with 1/4 in. shank routers, it is well-suited for countertop laminate work, edge finishing, and any application where a flawless trimmed edge matters.
Key Features
- File-Free Finish on Laminate Surfaces - the bit geometry is tuned specifically for plastic laminates, producing a smooth, chip-free edge that requires no follow-up filing or sanding, saving time and effort on every cut.
- 1/64 in. Radius Edge - the minimal radius softens the trimmed edge just enough to eliminate sharpness and prevent chipping, leaving laminate surfaces safe to handle and visually clean without altering the profile.
- HW (Hard Metal Carbide) Cutting Material - carbide construction delivers long-lasting sharpness and durability, maintaining cutting performance through repeated laminate trimming tasks.
- 2-Flute Design - dual cutting flutes balance cut quality and chip evacuation, helping maintain a consistent, smooth finish across the full 3/8 in. cutting height.
- 1/4 in. Shank - fits a wide range of handheld routers and router tables equipped with standard 1/4 in. collets, making this bit broadly compatible with common routing setups.
- Right-Hand Rotation - standard RH rotation is compatible with conventional router operation, so there is no need for special setup or modified technique.
- 2-1/16 in. Total Length - the compact overall length provides good tool control and stability when flush trimming laminate edges along countertops or panel edges.
Why This Product
- Designed specifically for laminate flush trimming - this is not a general-purpose bit adapted to laminate work. The geometry is purpose-built to trim plastic laminates cleanly in a single pass, eliminating the extra step of filing sharp edges afterward.
- The 1/64 in. radius means the finished edge is smooth and comfortable without being rounded enough to affect the laminate's visual profile - ideal for countertop and panel edge work where appearance matters.
- The 1/4 in. shank makes this bit accessible for users working with compact routers, trim routers, or standard router tables without requiring a collet adapter or specialty tooling.
- Two carbide flutes working together produce consistent results across the 3/8 in. cutting height, making this bit a reliable choice for laminate countertop trimming, edge finishing, and surface cleanup in woodworking and cabinetry applications.
Specifications
- Manufacturer Part Number: 807.004.11
- Brand: CMT Orange Tools
- Cutting Diameter: 1/2 in.
- Cutting Height: 3/8 in.
- Total Length: 2-1/16 in.
- Radius: 1/64 in.
- Shank: 1/4 in.
- Number of Flutes: 2
- Cutting Material: HW (Hard Metal Carbide)
- Rotation: Right-Hand (RH)
Approved Applications
- Flush trimming plastic laminate surfaces
- Laminate countertop edge trimming
- Edge finishing on laminate-covered panels
- File-free laminate edge cleanup after bonding
Frequently Asked Questions
What does "file-free" mean for this flush trim bit?
The "file-free" designation means the bit's geometry and carbide cutting edges are optimized to leave the trimmed laminate edge smooth enough to touch without any sharp burrs or rough spots - no hand filing or additional sanding is required after the cut. This saves time and produces a cleaner finished result compared to standard flush trim bits used on laminate.
What shank size does the CMT 807.004.11 require, and what routers is it compatible with?
This bit uses a 1/4 in. shank, which fits any handheld router or router table equipped with a standard 1/4 in. collet. It is also compatible with CNC routing machines that accept 1/4 in. tooling.
What is the purpose of the 1/64 in. radius on this flush trim bit?
The 1/64 in. radius creates a very slight rounding at the trimmed edge of the laminate. This is just enough to remove the sharp corner left by a square-edge trim, making the surface safe to handle and reducing the risk of edge chipping, while keeping the profile close enough to square that it does not visually alter the laminate's finished appearance.
How much laminate thickness can this bit handle in a single pass?
The cutting height of this bit is 3/8 in., meaning it can trim laminate and any substrate beneath it up to 3/8 in. in height in a single pass. Standard plastic laminates used in countertop and panel applications are well within this capacity, making the bit suitable for typical laminate trimming tasks without needing multiple passes.
Reviews
FAQs
Standard Shipping is free on most orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.